Shop
Showing 100–108 of 194 results
-
205 / 309205 GTI Brake Servo Vacuum Pipe
Direct replacement for the original.
Hose runs from: Side of inlet manifold to brake servo. On vacuum sunroof equipped cars there is a T-peice located near the brake servo. A short section of hose is supplied to replace this section if with sunroof is selected.
Designed to an OE style with the braided cotton outer covering.
Available for RHD and LHD configurations.
Supplied cut to length with our cobra clips for a neat installation.
(0 reviews)£13.38 + VAT Select options -
Induction Hoses205 GTI Rubber Induction Hoses – Individual Hose Selector
205 Gti Induction Hoses in rubber.
Fitment. Model 205 Gti 1.6 & 1.9. All Years
Split induction hoses are starting to become an issue on the 205 Gti.
Original 30+ year old rubber hoses are cracking and causing air leaks within the induction system.
We have re-manufactured all 3 of induction hoses. Using the latest 3-D scanning technologies we have produced a hose that will not look out of place in any concourse build!
Here you can choose between:
1) Slam Panel to Air Box Hose
2) Air Box to Air Flow Meter Hose
3) Air Flow Meter to Inlet Manifold Hose
All hoses are a direct replacement for the originals, and can be supplied with new clips. Just select from the drop down menu.
(0 reviews)£37.03 – £56.47 + VAT Select options -
205 / 309205 GTI Rubber Induction Hoses Set
Fitment: Model 205 Gti 1.6 & 1.9. All Years
Split induction hoses are starting to become an issue on the 205 Gti.
Original 30+ year old rubber hoses are cracking and causing air leaks within the induction system.
We have re-manufactured all 3 of the induction hoses. Using the latest 3-D scanning technologies we have produced a hose that will not look out of place in any concourse build!
All hoses are a direct replacement for the originals and can be supplied with new clips..
(0 reviews)£131.73 + VAT Select options -
205 / 309205 8v Rubber Oil Breather Hoses – Individual Hose Selector
These hoses replace the original worn rubber set, ensuring the highest oil breather system reliability possible.
Here you can choose and individually order the following 5 hoses in the system:
- Main Filler Hose
- Cam Cover To Block
- Filler Tower To Block
- Filler Cap to Induction Hose
- Filler Cap to Throttle Body
The hoses are suitable for all 205/309 1.6/1.9 GTI’s.
Hose No.1 is over £70 from Peugeot alone. Some of the others are no longer available from Peugeot.
If you require a complete kit, please take a look at our 205 8v Rubber Oil Breather Hoses Kit.
(0 reviews)£18.19 – £36.38 + VAT Select options -
205 / 309205 8v Rubber Oil Breather Hoses Kit
These hoses replace the original worn rubber set, ensuring the highest oil breather system reliability possible.
The kit comprises of following 5 hoses:
- Main Filler Hose
- Cam Cover To Block
- Filler Tower To Block
- Filler Cap to Induction Hose
- Filler Cap to Throttle Body
This kit is suitable for all 205/309 1.6/1.9 GTI’s.
Hose No.1 is over £70 from Peugeot alone. Some of the others are no longer available from Peugeot.
All hoses can be sold separate. Please take a look at our individual hose selector.
(0 reviews)£117.70 + VAT Add to cart -
205 / 309205 GTI (8v) Individual Coolant Hose Selector
If you do not require a full kit of hoses, we can offer all the hoses individually.
Please select your requirements.
Both RHD and LHD hoses are available.
(0 reviews)£15.98 – £25.70 + VAT Select options -
Breather Hoses inc Oil / S.A.D / Induction/Vacuum/Brake Servo205 8v Rubber Supplementary Device (SAD) Hoses 86-91
Direct replacement hoses for the “Supplementary Air Device” system found on all pre-CAT 205/309 GTI’s. These hoses are the same for RHD and LHD models.
Contents: Two replacement hoses to run from the SAD valve to Inlet track.
These hoses are suitable for all 205/309 1.6/1.9 GTI’s and available as a kit or individually – please select when adding to shopping cart.
Colour: Black
(0 reviews)£20.33 – £40.66 + VAT Select options -
205 / 30916v Crank Pulley with Trigger Wheel
Using our Crank pulley with Trigger wheel eliminates the need for the original heavy trigger pick-ups found on the flywheel of Mi16/S16/T16 engines.
Our aluminium crank pulleys are made from 7075 T6 aluminium, which is extremely strong and wear resistant. The pulleys incorporate the original style timing hole and are anodised black.
The steel timing rings are a 36-1 tooth design (This is the most common ignition pickup style supported by aftermarket management systems).
The rings are accurately laser cut from 3mm steel. Then zinc plated to offer rust protection.
We have designed a 4-point clamping system to eliminate slip. The ring can be clamped at any increment between 0-360 degrees meaning you can match the trigger wheel to your existing setting, if you already run a trigger wheel.
All our pulleys are CNC machined in house.
We will be developing a bracket for the sensor pickup soon. Please contact us for more details.
Note: This product is used with an aftermarket management system
(0 reviews)£99.01 + VAT Add to cart -
205 / 3098v Crank Pulley with Trigger Wheel
Our aluminium crank pulleys are made from 7075 T6 aluminium, which is extremely strong and wear resistant. The pulleys incorporate the original style timing hole and are anodised black.
The steel timing rings are a 36-1 tooth design (This is the most common ignition pickup style supported by aftermarket management systems).
The rings are accurately laser cut from 3mm steel. Then zinc plated to offer rust protection.
We have designed a 4-point clamping system to eliminate slip. The ring can be clamped at any increment between 0-360 degrees meaning you can match the trigger wheel to your existing setting, if you already run a trigger wheel.
All our pulleys are CNC machined in house.
We will be developing a bracket for the sensor pickup soon. Please contact us for more details.
Note: This product is used with an aftermarket management system
(0 reviews)£99.01 + VAT Add to cart