205 8v Rubber Oil Breather Hoses Kit

Code: RH205-3-2

These hoses replace the original worn rubber set, ensuring the highest oil breather system reliability possible.

The kit comprises of following 5 hoses:

  • Main Filler Hose
  • Cam Cover To Block
  • Filler Tower To Block
  • Filler Cap to Induction Hose
  • Filler Cap to Throttle Body

This kit is suitable for all 205/309 1.6/1.9 GTI’s.

Hose No.1 is over £70 from Peugeot alone. Some of the others are no longer available from Peugeot.

All hoses can be sold separate. Please take a look at our individual hose selector.

£117.70 + VAT

In Stock
Share (0)
Total: 0 Total: 0 Total: 0 Total: 0 Total: 0 Total: 0

Additional information

Weight 1.50 kg

You may also like…

  • 205 / 309

    205 GTI Rubber Fuel Lines

    Our Rubber fuel lines are remanufactured so they are a direct replacement for standard hoses.

    They are sold as a pair:

    • The short hose runs from the steel fuel line to the bottom of the fuel filter
    • The longer hose runs from the top of the fuel filter to the fuel rail

    Both hoses come with new banjo bolts and crush washers.

    Please note: We have changed the rubber spec to Gates SAE 30R14 T2  since June 2020.   Using this rubber spec our rubber fuel lines are now compatible with E10 grade fuel.  However, we would still advise customers to use E5 Super unleaded as there are other parts in the fuel system that may not be compatible with E10 unleaded.

    (0 reviews)
    £48.69 + VAT Add to cart
  • 205 / 309

    205 8v Silicone Supplementary Device (SAD) Hoses

    Direct replacement hoses for the “Supplementary Air Device” system found on all pre-CAT 205/309 GTI’s. These hoses are the same for RHD and LHD models. Both hoses are Fluro lined to prevent damage caused from any contact with oil.

    Contents: Two replacement hoses to run from the SAD valve to Inlet track.

    These hoses are suitable for all 205/309 1.6/1.9 GTI’s.

    Colour choice: Blue, Black or Red

    (0 reviews)
    £41.73 + VAT Select options
  • 205 / 309

    205 GTI 8v Silicone Coolant Hoses Kit

    The option to substitute the standard style top hose for a heat exchanger style top hose is available as drop down at purchase.

    Picture shows Heat Exchanger top hose:

    (0 reviews)
    £200.63 + VAT Select options
  • Aluminium Products

    205 GTI Thermostat Cap (86-91)

    3D CNC machined from billet aluminium.

    Originals caps have corroded badly over time. Deep pitting leads to leaks and with 2nd hand units now becoming hard to source we decided to design and make a replacement.

    Direct replacement for the original part.

    Fitment 85-91 (All aluminium caps) Not suitable for the plastic style.

     

    (0 reviews)
    £51.90 + VAT Add to cart

Related products

  • 205 / 309

    205 Fast Road Engine Mounting Kit

    EMB205-9 – Our 205 Gti Grp.N engine mounting kit has been one of our main sellers for over 10 years. It is perfect for track orientated cars but on the firm side for road cars.

    We have now developed our fast road set-up. A great upgrade for people looking to tighten up the engine movement but without going to the extreme of the Grp.N set-up.

    The mounts use the same proven design as our Grp.N set-up but with a softer grade of rubber to aid compliance.

    Available for: 205 1.6/1.9 GTI, 205 XS (please note when adding products to cart)

     

    (0 reviews)
    £100.05 + VAT Select options
  • 205 / 309

    205 Grp.N Lower Engine Bush

    EMB205-4 – 205 Grp.N Lower Engine Bush – a part of our complete Group N (Grp.N) Engine Mounting Kit has been designed to substantially reduce engine movement by incorporating up-rated and stiffened rubber components. The kit is ideally used for rallying, racing, enhanced engine conversions and modifications.

    Available for: 205 1.6/1.9 GTI, 205 XS (please select when adding products to cart)

    (0 reviews)
    £31.57 + VAT Select options
    205 / 309

    205 GTI Power Steering Cooling Loop

    This is the power steering cooling loop pipe which runs under the car on 205 GTI models equipped with PAS. The originals are prone to rust due to their location.

    Using an original we have re-manufactured them using a CNC tube bender, then a custom jig has been made to manipulate the final bend. Using CNC technology ensures their complicated shape is repeatedly replicated accurately.

    Manufacturing process:

    • Steel tube is CNC bent to match original shape
    • The lines are then Chromium 6-free plated
    • Clean pelleted (cleans inside tube)

     

     

     

    (0 reviews)
    £41.52 + VAT Add to cart
  • 205 / 309

    205 Heavy Duty Stub Axle

    Features:

    • In-house CNC machined
    • Larger rear collar
    • Material: EN24T
    • Chemically Blacked

    Note: Sold individually – increase quantity to buy more than one.

     

     

    (0 reviews)
    £56.38 + VAT Add to cart