205 Gti Front Bumper Mounting Kit

Code: BW205-4

The various parts which make up the 205 Gti Front bumper mounting system are prone to rust. If you are removing the front bumper you will more than likely find a lot of the parts unusable on the rebuild. Most of which is not available from Peugeot anymore.

We have re-manufactured the complete bumper mounting kit, most of which in stainless steel. So the bumper can be removed and re-fitted in the future without the risk of damaging the now hard to find plastic bumpers!

£186.18 + VAT

In Stock
Share (0)
Total: 0 Total: 0 Total: 0 Total: 0 Total: 0 Total: 0

Description

The kit also contains 4 T-bolts:

Additional information

Weight 3 kg

You may also like…

Related products

  • 205 / 309

    205 Bronze Gearstick Pivot Bushes Gti and Non Gti

    Fitment: Suitable for the 205 Gti and Non Gti.

     

     

     

     

    These bronze bushes replace the standard plastic ones found in the gearstick pivot point. These will not flex or distort and therefore reduce play in the linkage system.

    Notes: Ideally to be used with our 205 Gearchange Rods (3-rod kit) and 205 Bronze L-linkage Pivot Bush Kit, as well as Adjustable Quickshift.

    Sold in pairs as pictured

    (0 reviews)
    £14.98 + VAT Add to cart
  • 205 / 309

    205 Gearchange Rods (3-rod kit)

    Joints in the original gearchange rod setup contain plastic bushes that wear over time, making the gearchange very unprecise and leading to rods popping off and leaving you stranded on a side of the road or track. Our rods are steel-jointed with securing clips that cures both issues.

    Suitable for: 205 1.6/1.9 GTI

    (0 reviews)
    £44.94 + VAT Add to cart
  • 205 / 309

    205 Bronze L-linkage Pivot Bush Kit GTI

    The original linkage setup consists of two plastic bushes and a spring washer, even when new this setup had a lot of unwanted play in it. The linkage will now more than likely be considerably worn, causing the linkage system to feel “sloppy”. There are other kits available which replace the plastic bushes with bronze equivalents but the spring washer design is still utilized, along with the original large shanked bolt.

    Only by changing the design of the pivot system (by using this kit) can the sloop be reduced entirely.

    (1 review)
    £31.03 + VAT Add to cart
  • 205 / 309

    205 GTI CNC Bent Steel Fuel Lines

    Due to their location the steel fuel lines on the 205 Gti are prone to rust.

    Using original OE under body fuel lines we have re-manufactured them using a CNC tube bender. Using CNC technology ensures their complicated shape is repeatably replicated accurately.

    These lines are a direct fitment onto the standard clips, neatly routing the fuel lines as Peugeot intended. They are sold as pairs. 1x Feed and 1x Return. The feed line has the correct union at the bulkhead end to match either the OE Peugeot rubber fuel-filter hose or our remanufactured rubber hoses.

     

    (1 review)
    £79.18 + VAT Add to cart