205 Gti Front Bumper Mounting Kit

Code: BW205-4

The various parts which make up the 205 Gti Front bumper mounting system are prone to rust. If you are removing the front bumper you will more than likely find a lot of the parts unusable on the rebuild. Most of which is not available from Peugeot anymore.

We have re-manufactured the complete bumper mounting kit, most of which in stainless steel. So the bumper can be removed and re-fitted in the future without the risk of damaging the now hard to find plastic bumpers!

£186.18 + VAT

In Stock
Share (0)
Total: 0 Total: 0 Total: 0 Total: 0 Total: 0 Total: 0

Description

The kit also contains 4 T-bolts:

Additional information

Weight 3 kg

You may also like…

Related products

  • 205 / 309

    205 Grp.A Rear Beam Mount Kit

     

     

    Replaces standard rubber joints and mounts on all the mounting points of a rear beam.

    Fitting this kit means the rear beam is rigidly attached to the chassis. Giving a more predictable rear end under heavy cornering and more control during lift off over steer.

    Front flexible joints are replaced by acetal bushes (4 in the kit) while rear rubber “sandwich” mounts are replaced with “aircraft spec” quality aluminium blocks with offset studs (2 in the kit). This kit is an evolution and improved fit version of our original BBM-SA-R kit. Unlike standard items, our uprated items will not wear out!

    This modification is a real benefit to a track orientated 205/309. It will also benefit a road car with respect to handling characteristics but at an expense of a slight increase in road noise experienced in the cabin.

    Suitable for: Peugeot 205 GTI and 309 GTI.

    (0 reviews)
    £69.02 + VAT Add to cart
  • 205 / 309

    205 Gearchange Rods (3-rod kit)

    Joints in the original gearchange rod setup contain plastic bushes that wear over time, making the gearchange very unprecise and leading to rods popping off and leaving you stranded on a side of the road or track. Our rods are steel-jointed with securing clips that cures both issues.

    Suitable for: 205 1.6/1.9 GTI

    (0 reviews)
    £44.94 + VAT Add to cart
    205 / 309

    205 GTI Power Steering Cooling Loop

    This is the power steering cooling loop pipe which runs under the car on 205 GTI models equipped with PAS. The originals are prone to rust due to their location.

    Using an original we have re-manufactured them using a CNC tube bender, then a custom jig has been made to manipulate the final bend. Using CNC technology ensures their complicated shape is repeatedly replicated accurately.

    Manufacturing process:

    • Steel tube is CNC bent to match original shape
    • The lines are then Chromium 6-free plated
    • Clean pelleted (cleans inside tube)

     

     

     

    (0 reviews)
    £41.52 + VAT Add to cart
  • 205 / 309

    205 Grp.N Front Strut Top Rubbers

    These uprated rubbers replace standard soft rubbers in the shock absorbers top mounts, located just under strut turrets.

    The rubbers are constructed to a very high standard using a rubber compound (with an increased Shore Rating over original), which is considerably firmer than the standard rubbers, making them far stiffer. They give firmer ride and less front suspension flex.

    The strut rubbers come as a pair.

    Suitable for: Peugeot 205 GTI and 309 GTI.

    (0 reviews)
    £20.12 + VAT Add to cart