205 Gti Front Bumper Mounting Kit

Code: BW205-4

The various parts which make up the 205 Gti Front bumper mounting system are prone to rust. If you are removing the front bumper you will more than likely find a lot of the parts unusable on the rebuild. Most of which is not available from Peugeot anymore.

We have re-manufactured the complete bumper mounting kit, most of which in stainless steel. So the bumper can be removed and re-fitted in the future without the risk of damaging the now hard to find plastic bumpers!

£192.50 + VAT

In Stock
Share (0)
Total: 0 Total: 0 Total: 0 Total: 0 Total: 0 Total: 0

Description

The kit also contains 4 T-bolts:

Additional information

Weight 3 kg

You may also like…

Related products

  • 205 / 309

    205 Grp.N Lower Engine Bush

    EMB205-4 – 205 Grp.N Lower Engine Bush – a part of our complete Group N (Grp.N) Engine Mounting Kit has been designed to substantially reduce engine movement by incorporating up-rated and stiffened rubber components. The kit is ideally used for rallying, racing, enhanced engine conversions and modifications.

    Available for: 205 1.6/1.9 GTI, 205 XS (please select when adding products to cart)

    (0 reviews)
    £33.46 + VAT Select options
  • 205 / 309

    205 Fast Road Engine Mounting Kit

    EMB205-9 – Our 205 Gti Grp.N engine mounting kit has been one of our main sellers for over 10 years. It is perfect for track orientated cars but on the firm side for road cars.

    We have now developed our fast road set-up. A great upgrade for people looking to tighten up the engine movement but without going to the extreme of the Grp.N set-up.

    The mounts use the same proven design as our Grp.N set-up but with a softer grade of rubber to aid compliance.

    Available for: 205 1.6/1.9 GTI, 205 XS (please note when adding products to cart)

     

    (0 reviews)
    £106.05 + VAT Select options
  • 205 / 309

    205 Bronze L-linkage Pivot Bush Kit GTI

    The original linkage setup consists of two plastic bushes and a spring washer, even when new this setup had a lot of unwanted play in it. The linkage will now more than likely be considerably worn, causing the linkage system to feel “sloppy”. There are other kits available which replace the plastic bushes with bronze equivalents but the spring washer design is still utilized, along with the original large shanked bolt.

    Only by changing the design of the pivot system (by using this kit) can the sloop be reduced entirely.

    (1 review)
    £32.89 + VAT Add to cart
  • 205 / 309

    205 GTI Engine Mount Shim Kit

    Shims are placed behind buffers to space them closer to the top engine mount.

    Fitting the correct combination of shims means, as the engine moves under acceleration / engine braking the top mount can come into contact with the buffers sooner and reduce any excess movement.

    These can be used with OE std buffers or either of our Fast Road or GrpN Style replacements.

     

    Available for: 205 1.6/1.9 GTI, 205 XS

    (0 reviews)
    £8.10 + VAT Add to cart