These rubbers sit on the top of the radiator. The radiator spring locates in the rubber and keeps the radiator firmly in place.
We have reproduced these to the original design (we also have remanufactured the radiator springs).
Price is for a single item.
| Weight | 0.01 kg |
|---|
Fitment: All 205/309 Gti’s (1.6 & 1.9). All years. Direct fit to replace original part.
The original Peugeot lower cambelt covers (now no longer available from Peugeot) have a common tendency to wear and break away from their mounting points. Eventually causing them to rub on the cambelt.
We first designed the part in CAD before making a prototype for test fitment. Once satisfied the fitment was correct we invested in producing an injection mould tool to produce a run of finished parts.
Fitment: All 205/309 Gti’s fitted with Jetronic Fuel injection (Years: 86-91)
We have re-produced the bungs originally found on the Air Flow Meter.
Very few 205 Gti’s still have the bung in place.
These will be a great finishing touch for any owner wanting to maintain the AFM’s original look.
Original Peugeot Clips. We have bought a large batch from Peugeot as they often need replacing when fitting our new fuel lines or P.A.S cooling loop pipe.
They are sold individually – please enter the desired quantity when ordering.
The adjustable quickshift is a direct replacement for the standard L-Linkage attached to the subframe.
Suitable for: All 205 GTI and 309 GTI Models
Note: The GLP205-2 Bronze L-linkage Pivot Bush Kit is included in the quickshift price.
The original linkage setup consists of two plastic bushes and a spring washer, even when new this setup had a lot of unwanted play in it. The linkage will now more than likely be considerably worn, causing the linkage system to feel “sloppy”. There are other kits available which replace the plastic bushes with bronze equivalents but the spring washer design is still utilized, along with the original large shanked bolt.
Only by changing the design of the pivot system (by using this kit) can the sloop be reduced entirely.
Replaces standard rubber joints and mounts on all the mounting points of a rear beam.
Fitting this kit means the rear beam is rigidly attached to the chassis. Giving a more predictable rear end under heavy cornering and more control during lift off over steer.
Front flexible joints are replaced by acetal bushes (4 in the kit) while rear rubber “sandwich” mounts are replaced with “aircraft spec” quality aluminium blocks with offset studs (2 in the kit). This kit is an evolution and improved fit version of our original BBM-SA-R kit. Unlike standard items, our uprated items will not wear out!
This modification is a real benefit to a track orientated 205/309. It will also benefit a road car with respect to handling characteristics but at an expense of a slight increase in road noise experienced in the cabin.
Suitable for: Peugeot 205 GTI and 309 GTI.