8v Crank Pulley with Trigger Wheel

Code: LCP205-3

Our aluminium crank pulleys are made from 7075 T6 aluminium, which is extremely strong and wear resistant. The pulleys incorporate the original style timing hole and are anodised black.

The steel timing rings are a 36-1 tooth design (This is the most common ignition pickup style supported by aftermarket management systems).

The rings are accurately laser cut from 3mm steel. Then zinc plated to offer rust protection.

We have designed a 4-point clamping system to eliminate slip. The ring can be clamped at any increment between 0-360 degrees meaning you can match the trigger wheel to your existing setting, if you already run a trigger wheel.

All our pulleys are CNC machined in house.

We will be developing a bracket for the sensor pickup soon. Please contact us for more details.

Note: This product is used with an aftermarket management system

£99.01 + VAT

In Stock
Share (0)
Total: 0 Total: 0 Total: 0 Total: 0 Total: 0 Total: 0

Description

Trigger Wheel

Trigger Wheel

Additional information

Weight 0.80 kg

Related products

  • 205 / 309

    205 GTI Fuel Line + P.A.S. Pipe Clips

    Original Peugeot Clips. We have bought a large batch from Peugeot as they often need replacing when fitting our new fuel lines or P.A.S cooling loop pipe.

    They are sold individually – please enter the desired quantity when ordering.

    • 6x clips are needed to replace all the fuel lines under the car
    • 4x Clips are needed to replace the P.A.S cooling loop (1.9 GTI models only)

    (0 reviews)
    £2.25 + VAT Add to cart
  • 205 / 309

    205 / 106 Grp.N Lower Engine Fork Bush

    We have designed and manufactured this bush to offer a firmer option than the standard item (e.g. reduce engine movement), whilst still retaining some compliance compared to our Grp.A Bush. This product compliment’s Grp.N Full Engine Mounting Kit.

    Location: This bush is located within the fork which connects the subframe to the lower engine bush.

    Suitable For:

    • Fits all 106 and 205 models incl. GTi
    • Direct replacement for original

    Spec:

    • 70 shore natural rubber
    • Fully stressed relieved
    • Centreless ground outer diameter

     

    (0 reviews)
    £19.05 + VAT Select options
  • 205 / 309

    205 Bronze L-linkage Pivot Bush Kit GTI

    The original linkage setup consists of two plastic bushes and a spring washer, even when new this setup had a lot of unwanted play in it. The linkage will now more than likely be considerably worn, causing the linkage system to feel “sloppy”. There are other kits available which replace the plastic bushes with bronze equivalents but the spring washer design is still utilized, along with the original large shanked bolt.

    Only by changing the design of the pivot system (by using this kit) can the sloop be reduced entirely.

    (1 review)
    £31.03 + VAT Add to cart
  • 205 / 309

    205 GTI Rubber Fuel Lines

    Our Rubber fuel lines are remanufactured so they are a direct replacement for standard hoses.

    They are sold as a pair:

    • The short hose runs from the steel fuel line to the bottom of the fuel filter
    • The longer hose runs from the top of the fuel filter to the fuel rail

    Both hoses come with new banjo bolts and crush washers.

    Please note: We have changed the rubber spec to Gates SAE 30R14 T2  since June 2020.   Using this rubber spec our rubber fuel lines are now compatible with E10 grade fuel.  However, we would still advise customers to use E5 Super unleaded as there are other parts in the fuel system that may not be compatible with E10 unleaded.

    (0 reviews)
    £48.69 + VAT Add to cart