8v Crank Pulley with Trigger Wheel

Code: LCP205-3

Our aluminium crank pulleys are made from 7075 T6 aluminium, which is extremely strong and wear resistant. The pulleys incorporate the original style timing hole and are anodised black.

The steel timing rings are a 36-1 tooth design (This is the most common ignition pickup style supported by aftermarket management systems).

The rings are accurately laser cut from 3mm steel. Then zinc plated to offer rust protection.

We have designed a 4-point clamping system to eliminate slip. The ring can be clamped at any increment between 0-360 degrees meaning you can match the trigger wheel to your existing setting, if you already run a trigger wheel.

All our pulleys are CNC machined in house.

We will be developing a bracket for the sensor pickup soon. Please contact us for more details.

Note: This product is used with an aftermarket management system

£99.01 + VAT

In Stock
Share (0)
Total: 0 Total: 0 Total: 0 Total: 0 Total: 0 Total: 0

Description

Trigger Wheel

Trigger Wheel

Additional information

Weight 0.80 kg

Related products

  • 205 / 309

    205 Adjustable Top Mounts

     

     

    Our extremely popular 205-specific adjustable top suspension mounts.

    Suitable for: Peugeot 205 all models.

    Description:

    • These are intended for use with coilover suspension.
    • Material 7075 T6 Aluminium.
    • Fully CNC machined in house using the latest CAM technology.
    • They house a 42mm O/D Heavy Duty Spherical Bearing.
    • Camber adjustment available is from 0 – neg.3 degrees
    • Caster fixed at 4.5 Degrees Positive.
    • Engraved camber scale giving an indication of adjustment position.
    • Bearing reliefs are machined into the housing, making bearing changes quick and easy.
    • Anodised.
    • These are supplied with M14 Fittings – please email us at contact@bakerbm.com should you require M12
    (0 reviews)
    £260.05 + VAT Add to cart
    205 / 309

    205 GTI Power Steering Cooling Loop

    This is the power steering cooling loop pipe which runs under the car on 205 GTI models equipped with PAS. The originals are prone to rust due to their location.

    Using an original we have re-manufactured them using a CNC tube bender, then a custom jig has been made to manipulate the final bend. Using CNC technology ensures their complicated shape is repeatedly replicated accurately.

    Manufacturing process:

    • Steel tube is CNC bent to match original shape
    • The lines are then Chromium 6-free plated
    • Clean pelleted (cleans inside tube)

     

     

     

    (0 reviews)
    £41.52 + VAT Add to cart
  • 205 / 309

    205 Bronze L-linkage Pivot Bush Kit GTI

    The original linkage setup consists of two plastic bushes and a spring washer, even when new this setup had a lot of unwanted play in it. The linkage will now more than likely be considerably worn, causing the linkage system to feel “sloppy”. There are other kits available which replace the plastic bushes with bronze equivalents but the spring washer design is still utilized, along with the original large shanked bolt.

    Only by changing the design of the pivot system (by using this kit) can the sloop be reduced entirely.

    (1 review)
    £31.03 + VAT Add to cart
  • 205 / 309

    205 Grp.N Front Strut Top Rubbers

    These uprated rubbers replace standard soft rubbers in the shock absorbers top mounts, located just under strut turrets.

    The rubbers are constructed to a very high standard using a rubber compound (with an increased Shore Rating over original), which is considerably firmer than the standard rubbers, making them far stiffer. They give firmer ride and less front suspension flex.

    The strut rubbers come as a pair.

    Suitable for: Peugeot 205 GTI and 309 GTI.

    (0 reviews)
    £20.12 + VAT Read more