CNC machined aluminium pins to replace the plastic pins, which very often break off during panel removal.
The pins are made from 6082T6 and have milled grooves on the back of the heads, which align with the webbing on the panel.
A small amount of adhesive is needed to hold them in to place.
Ordering instructions: Price is £8.56 + VAT for 3 pins (3 pins per panel).
Each panel is handed so please specify which side you require.
If you require both – please order a “Full Set”.
£8.56 – £17.12 + VAT
In StockAdditional information
Weight | 0.1 kg |
---|---|
Please select type and quantity: | A full set of pins (Both sides), A set of 3 pins (Left side), A set of 3 pins (Right side) |
Related products
-
205 / 309
205 / 106 Grp.N Lower Engine Fork Bush
We have designed and manufactured this bush to offer a firmer option than the standard item (e.g. reduce engine movement), whilst still retaining some compliance compared to our Grp.A Bush. This product compliment’s Grp.N Full Engine Mounting Kit.
Location: This bush is located within the fork which connects the subframe to the lower engine bush.
Suitable For:
- Fits all 106 and 205 models incl. GTi
- Direct replacement for original
Spec:
- 70 shore natural rubber
- Fully stressed relieved
- Centreless ground outer diameter
(0 reviews)£19.05 + VAT Select options -
205 / 309
205 Bronze Gearstick Pivot Bushes Gti and Non Gti
Fitment: Suitable for the 205 Gti and Non Gti.
These bronze bushes replace the standard plastic ones found in the gearstick pivot point. These will not flex or distort and therefore reduce play in the linkage system.
Notes: Ideally to be used with our 205 Gearchange Rods (3-rod kit) and 205 Bronze L-linkage Pivot Bush Kit, as well as Adjustable Quickshift.
Sold in pairs as pictured
(0 reviews)£14.98 + VAT Add to cart -
205 / 309
205 Torsion Bar End Stop
The torsion bar end stops screw into the rear axle beam tube. They act as a end stop for the torsion bar screw
They are a direct replacement for the standard item. Two are required per axle.
Note: Sold individually – increase quantity to buy more than one.
(0 reviews)£3.85 + VAT Add to cart -
205 / 309
205 Grp.A Rear Beam Mount Kit
Replaces standard rubber joints and mounts on all the mounting points of a rear beam.
Fitting this kit means the rear beam is rigidly attached to the chassis. Giving a more predictable rear end under heavy cornering and more control during lift off over steer.
Front flexible joints are replaced by acetal bushes (4 in the kit) while rear rubber “sandwich” mounts are replaced with “aircraft spec” quality aluminium blocks with offset studs (2 in the kit). This kit is an evolution and improved fit version of our original BBM-SA-R kit. Unlike standard items, our uprated items will not wear out!
This modification is a real benefit to a track orientated 205/309. It will also benefit a road car with respect to handling characteristics but at an expense of a slight increase in road noise experienced in the cabin.
Suitable for: Peugeot 205 GTI and 309 GTI.
(0 reviews)£69.02 + VAT Add to cart