CNC machined aluminium pins to replace the plastic pins, which very often break off during panel removal.
The pins are made from 6082T6 and have milled grooves on the back of the heads, which align with the webbing on the panel.
A small amount of adhesive is needed to hold them in to place.
Ordering instructions: Price is £8.56 + VAT for 3 pins (3 pins per panel).
Each panel is handed so please specify which side you require.
If you require both – please order a “Full Set”.
£8.56 – £17.12 + VAT
In StockAdditional information
Weight | 0.1 kg |
---|---|
Please select type and quantity: | A full set of pins (Both sides), A set of 3 pins (Left side), A set of 3 pins (Right side) |
Related products
-
205 / 309
205 Bronze Gearstick Pivot Bushes Gti and Non Gti
Fitment: Suitable for the 205 Gti and Non Gti.
These bronze bushes replace the standard plastic ones found in the gearstick pivot point. These will not flex or distort and therefore reduce play in the linkage system.
Notes: Ideally to be used with our 205 Gearchange Rods (3-rod kit) and 205 Bronze L-linkage Pivot Bush Kit, as well as Adjustable Quickshift.
Sold in pairs as pictured
(0 reviews)£14.98 + VAT Add to cart -
205 / 309
205 / 106 Grp.A Lower Engine Fork Bush
This is the one bush which gets over looked when the engine mounts are uprated. The original bush is usually worn and allows unnecessary engine movement for race/rally/trackday setups.
Location: This bush is located within the fork which connects the subframe to the lower engine bush.
Suitable For:
- Fits all 106 and 205 models incl. GTi
- Direct replacement for original
For a more compliant version of the bush, take a look at the Grp.N version.
(0 reviews)£20.87 + VAT Select options -
205 / 309
205 Grp.N Front Strut Top Rubbers
These uprated rubbers replace standard soft rubbers in the shock absorbers top mounts, located just under strut turrets.
The rubbers are constructed to a very high standard using a rubber compound (with an increased Shore Rating over original), which is considerably firmer than the standard rubbers, making them far stiffer. They give firmer ride and less front suspension flex.
The strut rubbers come as a pair.
Suitable for: Peugeot 205 GTI and 309 GTI.
(0 reviews)£20.12 + VAT Add to cart -
205 / 309
205 Torsion Bar Adjuster Screw
Features:
- Essential part of the rear beam assembly
- In-house CNC machined
- Plated to provide rust protection
- Two torsion bar screws are needed per beam
Note: Sold individually – increase quantity in order to buy more than one.
(0 reviews)£4.07 + VAT Add to cart