205 GTI Rubber Induction Hoses Set

Code: RH205-25

Fitment: Model 205 Gti 1.6 & 1.9.  All Years

Split induction hoses are starting to become an issue on the 205 Gti.

Original 30+ year old rubber hoses are cracking and causing air leaks within the induction system.

We have re-manufactured all 3 of the induction hoses. Using the latest 3-D scanning technologies we have produced a hose that will not look out of place in any concourse build!

All hoses are a direct replacement for the originals and can be supplied with new clips..

 

£131.73 + VAT

In Stock
Product total
Options total
Grand total
Share (0)
Total: 0 Total: 0 Total: 0 Total: 0 Total: 0 Total: 0

Description

Induction hose clips set:

Additional information

Weight 1.5 kg
Add a hose clips set?

,

Related products

  • 205 / 309

    205 Bronze L-linkage Pivot Bush Kit GTI

    The original linkage setup consists of two plastic bushes and a spring washer, even when new this setup had a lot of unwanted play in it. The linkage will now more than likely be considerably worn, causing the linkage system to feel “sloppy”. There are other kits available which replace the plastic bushes with bronze equivalents but the spring washer design is still utilized, along with the original large shanked bolt.

    Only by changing the design of the pivot system (by using this kit) can the sloop be reduced entirely.

    (1 review)
    £31.03 + VAT Add to cart
  • 205 / 309

    205 GTI Fuel Line + P.A.S. Pipe Clips

    Original Peugeot Clips. We have bought a large batch from Peugeot as they often need replacing when fitting our new fuel lines or P.A.S cooling loop pipe.

    They are sold individually – please enter the desired quantity when ordering.

    • 6x clips are needed to replace all the fuel lines under the car
    • 4x Clips are needed to replace the P.A.S cooling loop (1.9 GTI models only)

    (0 reviews)
    £2.25 + VAT Add to cart
    205 / 309

    205 GTI Power Steering Cooling Loop

    This is the power steering cooling loop pipe which runs under the car on 205 GTI models equipped with PAS. The originals are prone to rust due to their location.

    Using an original we have re-manufactured them using a CNC tube bender, then a custom jig has been made to manipulate the final bend. Using CNC technology ensures their complicated shape is repeatedly replicated accurately.

    Manufacturing process:

    • Steel tube is CNC bent to match original shape
    • The lines are then Chromium 6-free plated
    • Clean pelleted (cleans inside tube)

     

     

     

    (0 reviews)
    £41.52 + VAT Add to cart
  • 205 / 309

    205 Grp.A Rear Beam Mount Kit

     

     

    Replaces standard rubber joints and mounts on all the mounting points of a rear beam.

    Fitting this kit means the rear beam is rigidly attached to the chassis. Giving a more predictable rear end under heavy cornering and more control during lift off over steer.

    Front flexible joints are replaced by acetal bushes (4 in the kit) while rear rubber “sandwich” mounts are replaced with “aircraft spec” quality aluminium blocks with offset studs (2 in the kit). This kit is an evolution and improved fit version of our original BBM-SA-R kit. Unlike standard items, our uprated items will not wear out!

    This modification is a real benefit to a track orientated 205/309. It will also benefit a road car with respect to handling characteristics but at an expense of a slight increase in road noise experienced in the cabin.

    Suitable for: Peugeot 205 GTI and 309 GTI.

    (0 reviews)
    £69.02 + VAT Add to cart