Description
205 Gti Rear Quarter Window Seals.
Original seals suffer badly with shrinkage and eventually leak. Causing wet a carpet in the rear of the cabin.
Our seals are a direct replacement for the originals.
Price is for a single.seal.
205 Gti Rear Quarter window seal
You may also like…
Related products
-
205 / 309205 GTI Rubber Fuel Lines
Our Rubber fuel lines are remanufactured so they are a direct replacement for standard hoses.
They are sold as a pair:
- The short hose runs from the steel fuel line to the bottom of the fuel filter
- The longer hose runs from the top of the fuel filter to the fuel rail
Both hoses come with new banjo bolts and crush washers.
Please note: We have changed the rubber spec to Gates SAE 30R14 T2 since June 2020. Using this rubber spec our rubber fuel lines are now compatible with E10 grade fuel. However, we would still advise customers to use E5 Super unleaded as there are other parts in the fuel system that may not be compatible with E10 unleaded.
(0 reviews)£48.69 + VAT Add to cart -
205 / 309205 / 106 Grp.A Lower Engine Fork Bush
This is the one bush which gets over looked when the engine mounts are uprated. The original bush is usually worn and allows unnecessary engine movement for race/rally/trackday setups.
Location: This bush is located within the fork which connects the subframe to the lower engine bush.
Suitable For:
- Fits all 106 and 205 models incl. GTi
- Direct replacement for original
For a more compliant version of the bush, take a look at the Grp.N version.
(0 reviews)£20.87 + VAT Select options -
205 / 309205 Grp.A Rear Beam Mount Kit
Replaces standard rubber joints and mounts on all the mounting points of a rear beam.
Fitting this kit means the rear beam is rigidly attached to the chassis. Giving a more predictable rear end under heavy cornering and more control during lift off over steer.
Front flexible joints are replaced by acetal bushes (4 in the kit) while rear rubber “sandwich” mounts are replaced with “aircraft spec” quality aluminium blocks with offset studs (2 in the kit). This kit is an evolution and improved fit version of our original BBM-SA-R kit. Unlike standard items, our uprated items will not wear out!
This modification is a real benefit to a track orientated 205/309. It will also benefit a road car with respect to handling characteristics but at an expense of a slight increase in road noise experienced in the cabin.
Suitable for: Peugeot 205 GTI and 309 GTI.
(0 reviews)£69.02 + VAT Add to cart -
205 / 309205 Bronze L-linkage Pivot Bush Kit GTI
The original linkage setup consists of two plastic bushes and a spring washer, even when new this setup had a lot of unwanted play in it. The linkage will now more than likely be considerably worn, causing the linkage system to feel “sloppy”. There are other kits available which replace the plastic bushes with bronze equivalents but the spring washer design is still utilized, along with the original large shanked bolt.
Only by changing the design of the pivot system (by using this kit) can the sloop be reduced entirely.
(1 review)£31.03 + VAT Add to cart