205 Gti Outer Window Scrapers Sold in pairs

Code: BW205 55

£51.36 + VAT

In Stock
Share (0)
Total: 0 Total: 0 Total: 0 Total: 0 Total: 0 Total: 0

Description

We have been working on the development of our replacement window scrapers for a little while now!

 

These have been made using a 2-stage extruded rubber mould. This enables us to have a firm rubber compound for the part of the seal which clips into place, while also allowing a flexible/soft rubber for the areas we want to seal against the glass.  These are also suitable for the 309 3 door only.

We used a rubber spec which has a high UV resistance. So to resistance ageing.

 

The end trimming is done on one of our CNC machines.

 

Flocking along the contact edges enable the rubber to glide against the glass.

 

Sold in Pairs

Weight 400 grams

Additional information

Weight 2 kg

You may also like…

  • 205 / 309

    205Gti Rear Bumper Mounting Kit

    We can now offer a complete 205 Rear Bumper Mounting Kit! Parts also available separately.

    We have remanufactured all the parts for a direct replacement for standard items.

    T-Bolts are Stainless Steel.

    Brackets and Top Hat Spacers are Zinc plated mild steel. 

    (0 reviews)
    £83.46 + VAT Add to cart
  • 205 / 309

    205 Gti Rear Quarter window seal

    (0 reviews)
    £69.55 + VAT Read more
    205 / 309

    Wurth Plastic Trim Dye

    (1 review)
    £29.64 + VAT Select options
  • 205 / 309

    205 Gti Front Bumper Mounting Kit

    The various parts which make up the 205 Gti Front bumper mounting system are prone to rust. If you are removing the front bumper you will more than likely find a lot of the parts unusable on the rebuild. Most of which is not available from Peugeot anymore.

    We have re-manufactured the complete bumper mounting kit, most of which in stainless steel. So the bumper can be removed and re-fitted in the future without the risk of damaging the now hard to find plastic bumpers!

    (0 reviews)
    £186.18 + VAT Add to cart

Related products

    205 / 309

    205 GTI Power Steering Cooling Loop

    This is the power steering cooling loop pipe which runs under the car on 205 GTI models equipped with PAS. The originals are prone to rust due to their location.

    Using an original we have re-manufactured them using a CNC tube bender, then a custom jig has been made to manipulate the final bend. Using CNC technology ensures their complicated shape is repeatedly replicated accurately.

    Manufacturing process:

    • Steel tube is CNC bent to match original shape
    • The lines are then Chromium 6-free plated
    • Clean pelleted (cleans inside tube)

     

     

     

    (0 reviews)
    £41.52 + VAT Add to cart
  • 205 / 309

    205 Grp.A Rear Beam Mount Kit

     

     

    Replaces standard rubber joints and mounts on all the mounting points of a rear beam.

    Fitting this kit means the rear beam is rigidly attached to the chassis. Giving a more predictable rear end under heavy cornering and more control during lift off over steer.

    Front flexible joints are replaced by acetal bushes (4 in the kit) while rear rubber “sandwich” mounts are replaced with “aircraft spec” quality aluminium blocks with offset studs (2 in the kit). This kit is an evolution and improved fit version of our original BBM-SA-R kit. Unlike standard items, our uprated items will not wear out!

    This modification is a real benefit to a track orientated 205/309. It will also benefit a road car with respect to handling characteristics but at an expense of a slight increase in road noise experienced in the cabin.

    Suitable for: Peugeot 205 GTI and 309 GTI.

    (0 reviews)
    £69.02 + VAT Add to cart
  • 205 / 309

    205 / 106 Grp.A Lower Engine Fork Bush

    This is the one bush which gets over looked when the engine mounts are uprated. The original bush is usually worn and allows unnecessary engine movement for race/rally/trackday setups.

    Location: This bush is located within the fork which connects the subframe to the lower engine bush.

    Suitable For:

    • Fits all 106 and 205 models incl. GTi
    • Direct replacement for original

    For a more compliant version of the bush, take a look at the Grp.N version.

    (0 reviews)
    £20.87 + VAT Select options
  • 205 / 309

    205 Grp.N Front Strut Top Rubbers

    These uprated rubbers replace standard soft rubbers in the shock absorbers top mounts, located just under strut turrets.

    The rubbers are constructed to a very high standard using a rubber compound (with an increased Shore Rating over original), which is considerably firmer than the standard rubbers, making them far stiffer. They give firmer ride and less front suspension flex.

    The strut rubbers come as a pair.

    Suitable for: Peugeot 205 GTI and 309 GTI.

    (0 reviews)
    £20.12 + VAT Add to cart