205 GTI Brake Servo Vacuum Pipe

Code: RH205-21-2

Direct replacement for the original.

Hose runs from: Side of inlet manifold to brake servo. On vacuum sunroof equipped cars there is a T-peice located near the brake servo. A short section of hose is supplied to replace this section if with sunroof is selected.

Designed to an OE style with the braided cotton outer covering.

Available for RHD and LHD configurations.

Supplied cut to length with our cobra clips for a neat installation.

£13.38 + VAT

In Stock
Product total
Options total
Grand total
Share (0)
Total: 0 Total: 0 Total: 0 Total: 0 Total: 0 Total: 0

Description

Additional information

Weight 0.4 kg
With or Without sunroof

With sunroof, Without sunroof

Related products

  • 205 / 309

    205 Grp.N Front Strut Top Rubbers

    These uprated rubbers replace standard soft rubbers in the shock absorbers top mounts, located just under strut turrets.

    The rubbers are constructed to a very high standard using a rubber compound (with an increased Shore Rating over original), which is considerably firmer than the standard rubbers, making them far stiffer. They give firmer ride and less front suspension flex.

    The strut rubbers come as a pair.

    Suitable for: Peugeot 205 GTI and 309 GTI.

    (0 reviews)
    £20.12 + VAT Add to cart
  • 205 / 309

    205 / 106 Grp.N Lower Engine Fork Bush

    We have designed and manufactured this bush to offer a firmer option than the standard item (e.g. reduce engine movement), whilst still retaining some compliance compared to our Grp.A Bush. This product compliment’s Grp.N Full Engine Mounting Kit.

    Location: This bush is located within the fork which connects the subframe to the lower engine bush.

    Suitable For:

    • Fits all 106 and 205 models incl. GTi
    • Direct replacement for original

    Spec:

    • 70 shore natural rubber
    • Fully stressed relieved
    • Centreless ground outer diameter

     

    (0 reviews)
    £19.05 + VAT Select options
  • 205 / 309

    205 GTI Fuel Line + P.A.S. Pipe Clips

    Original Peugeot Clips. We have bought a large batch from Peugeot as they often need replacing when fitting our new fuel lines or P.A.S cooling loop pipe.

    They are sold individually – please enter the desired quantity when ordering.

    • 6x clips are needed to replace all the fuel lines under the car
    • 4x Clips are needed to replace the P.A.S cooling loop (1.9 GTI models only)

    (0 reviews)
    £2.25 + VAT Add to cart
  • 205 / 309

    205 Grp.A Rear Beam Mount Kit

     

     

    Replaces standard rubber joints and mounts on all the mounting points of a rear beam.

    Fitting this kit means the rear beam is rigidly attached to the chassis. Giving a more predictable rear end under heavy cornering and more control during lift off over steer.

    Front flexible joints are replaced by acetal bushes (4 in the kit) while rear rubber “sandwich” mounts are replaced with “aircraft spec” quality aluminium blocks with offset studs (2 in the kit). This kit is an evolution and improved fit version of our original BBM-SA-R kit. Unlike standard items, our uprated items will not wear out!

    This modification is a real benefit to a track orientated 205/309. It will also benefit a road car with respect to handling characteristics but at an expense of a slight increase in road noise experienced in the cabin.

    Suitable for: Peugeot 205 GTI and 309 GTI.

    (0 reviews)
    £69.02 + VAT Add to cart