205 GTI-6 Aluminium Thermostat Adaptor

Code: AP205-2

The front thermostat hose is a problem when replacing the standard 205 engine with a 2.0L 16v engine from the 306 GTi6. As the GTi6 has a non standard hose fitment making the conversion not only difficult but also messy if not done correctly.

This lightweight adaptor is designed to be a direct fitment to the side of the GTi6 thermostat housing. The original metal 8v connector cap can then be reused.

The adaptors have been precision machined (in house) from high quality billet aluminium. The centre hole is tapered to ensure an efficient coolant flow. A suitable O-ring is supplied to ensure the 8v cap will seal correctly.

£46.01 + VAT

In Stock
Share (0)
Total: 0 Total: 0 Total: 0 Total: 0 Total: 0 Total: 0

Additional information

Weight 0.15 kg

You may also like…

  • 205 / 309

    205 GTi-6 Silicone Coolant Hoses Kit

    Complete Coolant hose Kit to suit 205 GTis fitted with the 2.0 Gti-6 Engine found in the Peugeot 306 Gti-6 or Citroen Xsara VTS.

    In recent years, transplanting the Gti-6 engine into a 205 Gti has become very popular. Until now there has not been a coolant kit available for this conversion.  We have designed RHD and LHD specific kits.

    This kit includes all the coolant hoses in the 205 Gti-6 system. Making the coolant installation quick neat and very reliable.

     

     

    Note:  We will supply a 32mm internal diameter inner wing to water distribution block hose in this kit. Dependent upon parts used in the conversion, a 36mm hose can sometimes be required. If this is the case just let us know at the point of order and we will substitute this one in the kit for you.

     

    Colour choice: Blue, Black or Red

    (0 reviews)
    £194.72 + VAT Select options
  • 205 / 309

    GTi-6 Silicone Oil Breather Hose Kit

    Complete Oil breather hose kit to replace the original oil breather hoses on the 306Gti-6 engine, ensuring the highest oil breather system reliability possible. Made to the same high standards as our other long established Silicone hose kits. Contents: The kit comprises of 5 hoses. Colour choice: Blue, Black or Red Suitable for RHD and LHD set-ups.

    (0 reviews)
    £108.26 + VAT Select options
  • Aluminium Products

    205 GTI Thermostat Cap (86-91)

    3D CNC machined from billet aluminium.

    Originals caps have corroded badly over time. Deep pitting leads to leaks and with 2nd hand units now becoming hard to source we decided to design and make a replacement.

    Direct replacement for the original part.

    Fitment 85-91 (All aluminium caps) Not suitable for the plastic style.

     

    (0 reviews)
    £51.90 + VAT Add to cart
  • 205 / 309

    205 Shortened Coolant Radiator

    These radiators are ideal for anybody looking to maximise the performance of their Peugeot 205 GTI/Mi16. They are approximately 3 inches shorter than the original radiator and 64 mm thick (twice as thick as standard).

    When running Carbs or Throttle bodies in conjunction with the standard radiator set-up the inlet temperatures become a problem, they effectively stifle the potential performance of your engine. Switching to one of our shortened radiators enables you to take full advantage of the direct cold air flow now available.

    These have been designed so they are direct fitment into your 205 GTI’s engine bay.

    A slim line cooling fan can be added for an extra £50.00.  Delivery approx 4 weeks

     

     

    (0 reviews)
    £428.00 – £481.50 + VAT Select options

Related products

  • 205 / 309

    205 Grp.N Top Engine Mount inc. Buffers

    EMB205-2 – Group N Top Engine Mount – a part of our complete Group N (Grp.N) Engine Mounting Kit that has been designed to substantially reduce engine movement by incorporating up-rated and stiffened rubber components. The kit is ideally used for rallying, racing, enhanced engine conversions and modifications.

    Note: The top mount comes with a pair of EMB205-5 top mount buffers.

    Available for: 205 1.6/1.9 GTI, 205 XS (please choose when adding products to cart)

    (0 reviews)
    £42.27 + VAT Select options
  • 205 / 309

    205 Torsion Bar End Stop

    The torsion bar end stops screw into the rear axle beam tube. They act as a end stop for the torsion bar screw

    They are a direct replacement for the standard item. Two are required per axle.

    Note: Sold individually – increase quantity to buy more than one.

    (0 reviews)
    £3.85 + VAT Add to cart
  • 205 / 309

    205 / 106 Grp.N Lower Engine Fork Bush

    We have designed and manufactured this bush to offer a firmer option than the standard item (e.g. reduce engine movement), whilst still retaining some compliance compared to our Grp.A Bush. This product compliment’s Grp.N Full Engine Mounting Kit.

    Location: This bush is located within the fork which connects the subframe to the lower engine bush.

    Suitable For:

    • Fits all 106 and 205 models incl. GTi
    • Direct replacement for original

    Spec:

    • 70 shore natural rubber
    • Fully stressed relieved
    • Centreless ground outer diameter

     

    (0 reviews)
    £19.05 + VAT Select options
  • 205 / 309

    205 GTI Fuel Line + P.A.S. Pipe Clips

    Original Peugeot Clips. We have bought a large batch from Peugeot as they often need replacing when fitting our new fuel lines or P.A.S cooling loop pipe.

    They are sold individually – please enter the desired quantity when ordering.

    • 6x clips are needed to replace all the fuel lines under the car
    • 4x Clips are needed to replace the P.A.S cooling loop (1.9 GTI models only)

    (0 reviews)
    £2.25 + VAT Add to cart