205 GTI Thermostat Cap (86-91)

Code: AP205-7

3D CNC machined from billet aluminium.

Originals caps have corroded badly over time. Deep pitting leads to leaks and with 2nd hand units now becoming hard to source we decided to design and make a replacement.

Direct replacement for the original part.

Fitment 85-91 (All aluminium caps) Not suitable for the plastic style.

 

£51.90 + VAT

In Stock
Share (0)
Total: 0 Total: 0 Total: 0 Total: 0 Total: 0 Total: 0

Additional information

Weight 0.10 kg

You may also like…

  • 205 / 309

    205 GTI RHD Rubber Coolant Hoses Kits (All variants)

    These hoses replace the original worn rubber set, ensuring the highest coolant system reliability possible, whilst giving OE look and being cheaper than our Silicone Coolant Hose Kit.

    Contents: The 8v coolant hose kit includes all hoses within the coolant system on a RHD Peugeot 205 GTI. For

    Notes: All hoses can be sold separate.

    We offer this kit for Pre91 and Post91 setups. Please select your setup when purchasing.

    (0 reviews)
    £163.71 – £172.27 + VAT Select options
  • Breather Hoses inc Oil / S.A.D / Induction/Vacuum/Brake Servo

    205 8v Rubber Supplementary Device (SAD) Hoses 86-91

    Direct replacement hoses for the “Supplementary Air Device” system found on all pre-CAT 205/309 GTI’s. These hoses are the same for RHD and LHD models.

    Contents: Two replacement hoses to run from the SAD valve to Inlet track.

    These hoses are suitable for all 205/309 1.6/1.9 GTI’s and available as a kit or individually – please select when adding to shopping cart.

    Colour: Black

    (0 reviews)
    £20.33 – £40.66 + VAT Select options

Related products

  • 205 / 309

    205 GTI Rubber Fuel Lines

    Our Rubber fuel lines are remanufactured so they are a direct replacement for standard hoses.

    They are sold as a pair:

    • The short hose runs from the steel fuel line to the bottom of the fuel filter
    • The longer hose runs from the top of the fuel filter to the fuel rail

    Both hoses come with new banjo bolts and crush washers.

    Please note: We have changed the rubber spec to Gates SAE 30R14 T2  since June 2020.   Using this rubber spec our rubber fuel lines are now compatible with E10 grade fuel.  However, we would still advise customers to use E5 Super unleaded as there are other parts in the fuel system that may not be compatible with E10 unleaded.

    (0 reviews)
    £48.69 + VAT Add to cart
  • 205 / 309

    205 Torsion Bar End Stop

    The torsion bar end stops screw into the rear axle beam tube. They act as a end stop for the torsion bar screw

    They are a direct replacement for the standard item. Two are required per axle.

    Note: Sold individually – increase quantity to buy more than one.

    (0 reviews)
    £3.85 + VAT Add to cart
  • 205 / 309

    205 Bronze Gearstick Pivot Bushes Gti and Non Gti

    Fitment: Suitable for the 205 Gti and Non Gti.

     

     

     

     

    These bronze bushes replace the standard plastic ones found in the gearstick pivot point. These will not flex or distort and therefore reduce play in the linkage system.

    Notes: Ideally to be used with our 205 Gearchange Rods (3-rod kit) and 205 Bronze L-linkage Pivot Bush Kit, as well as Adjustable Quickshift.

    Sold in pairs as pictured

    (0 reviews)
    £14.98 + VAT Add to cart
  • 205 / 309

    205 / 106 Grp.A Lower Engine Fork Bush

    This is the one bush which gets over looked when the engine mounts are uprated. The original bush is usually worn and allows unnecessary engine movement for race/rally/trackday setups.

    Location: This bush is located within the fork which connects the subframe to the lower engine bush.

    Suitable For:

    • Fits all 106 and 205 models incl. GTi
    • Direct replacement for original

    For a more compliant version of the bush, take a look at the Grp.N version.

    (0 reviews)
    £20.87 + VAT Select options