This is the one bush which gets over looked when the engine mounts are uprated. The original bush is usually worn and allows unnecessary engine movement for race/rally/trackday setups.
Location: This bush is located within the fork which connects the subframe to the lower engine bush.
Suitable For:
For a more compliant version of the bush, take a look at the Grp.N version.
| Weight | 0.10 kg |
|---|---|
| Car Model | 106 Car Model, 205 Car Model |
EMB205-3 – 205 Grp.N Gearbox Mount – a part of our complete Group N (Grp.N) Engine Mounting Kit has been designed to substantially reduce engine movement by incorporating up-rated and stiffened rubber components. The kit is ideally used for rallying, racing, enhanced engine conversions and modifications.
Available for: 205 1.6/1.9 GTI, 205 XS (please note when adding products to cart)
Shims are placed behind buffers to space them closer to the top engine mount.
Fitting the correct combination of shims means, as the engine moves under acceleration / engine braking the top mount can come into contact with the buffers sooner and reduce any excess movement.
These can be used with OE std buffers or either of our Fast Road or GrpN Style replacements.
Available for: 205 1.6/1.9 GTI, 205 XS
EMB205-5 – Group N Top Mount Buffer – a part of our complete Group N (Grp.N) Engine Mounting Kit that has been designed to substantially reduce engine movement by incorporating up-rated and stiffened rubber components. The kit is ideally used for rallying, racing, enhanced engine conversions and modifications.
Note: Additional individual buffer. Add quantity for more.
Fitment for: 205 1.6/1.9 GTI, 205 XS
EMB205-4 – 205 Grp.N Lower Engine Bush – a part of our complete Group N (Grp.N) Engine Mounting Kit has been designed to substantially reduce engine movement by incorporating up-rated and stiffened rubber components. The kit is ideally used for rallying, racing, enhanced engine conversions and modifications.
Available for: 205 1.6/1.9 GTI, 205 XS (please select when adding products to cart)
The offset washer is used to locate one end of the torsion bar into the trailing arm. These are prone to damage on removal.
They are a direct replacement for the standard item. Two are required per axle.
Note: Sold individually – increase quantity to buy more than one.
EMB205-1 – Complete Group N (Grp.N) Engine Mounting Kit has been designed to substantially reduce engine movement by incorporating up-rated and stiffened rubber components. The kit is ideally used for rallying, racing, enhanced engine conversions and modifications.
Contents of the kit also available individually.
Available for: 205 1.6/1.9 GTI, 205 XS (please note when adding products to cart)
The original linkage setup consists of two plastic bushes and a spring washer, even when new this setup had a lot of unwanted play in it. The linkage will now more than likely be considerably worn, causing the linkage system to feel “sloppy”. There are other kits available which replace the plastic bushes with bronze equivalents but the spring washer design is still utilized, along with the original large shanked bolt.
Only by changing the design of the pivot system (by using this kit) can the sloop be reduced entirely.
These hoses replace the original worn rubber set, ensuring the highest coolant system reliability possible, whilst giving OE look and being cheaper than our Silicone Coolant Hose Kit.
Contents: The 8v coolant hose kit includes all hoses within the coolant system on a RHD Peugeot 205 GTI. For
Notes: All hoses can be sold separate.
We offer this kit for Pre91 and Post91 setups. Please select your setup when purchasing.