205 Grp.A Rear Beam Mount Kit

Code: SMB205-3

 

 

Replaces standard rubber joints and mounts on all the mounting points of a rear beam.

Fitting this kit means the rear beam is rigidly attached to the chassis. Giving a more predictable rear end under heavy cornering and more control during lift off over steer.

Front flexible joints are replaced by acetal bushes (4 in the kit) while rear rubber “sandwich” mounts are replaced with “aircraft spec” quality aluminium blocks with offset studs (2 in the kit). This kit is an evolution and improved fit version of our original BBM-SA-R kit. Unlike standard items, our uprated items will not wear out!

This modification is a real benefit to a track orientated 205/309. It will also benefit a road car with respect to handling characteristics but at an expense of a slight increase in road noise experienced in the cabin.

Suitable for: Peugeot 205 GTI and 309 GTI.

£69.02 + VAT

In Stock
Share (0)
Total: 0 Total: 0 Total: 0 Total: 0 Total: 0 Total: 0

Additional information

Weight 1 kg

Related products

    205 / 309

    205 GTI Power Steering Cooling Loop

    This is the power steering cooling loop pipe which runs under the car on 205 GTI models equipped with PAS. The originals are prone to rust due to their location.

    Using an original we have re-manufactured them using a CNC tube bender, then a custom jig has been made to manipulate the final bend. Using CNC technology ensures their complicated shape is repeatedly replicated accurately.

    Manufacturing process:

    • Steel tube is CNC bent to match original shape
    • The lines are then Chromium 6-free plated
    • Clean pelleted (cleans inside tube)

     

     

     

    (0 reviews)
    £41.52 + VAT Add to cart
  • 205 / 309

    205 GTI Engine Mount Shim Kit

    Shims are placed behind buffers to space them closer to the top engine mount.

    Fitting the correct combination of shims means, as the engine moves under acceleration / engine braking the top mount can come into contact with the buffers sooner and reduce any excess movement.

    These can be used with OE std buffers or either of our Fast Road or GrpN Style replacements.

     

    Available for: 205 1.6/1.9 GTI, 205 XS

    (0 reviews)
    £7.70 + VAT Add to cart
  • 205 / 309

    205 Bronze L-linkage Pivot Bush Kit GTI

    The original linkage setup consists of two plastic bushes and a spring washer, even when new this setup had a lot of unwanted play in it. The linkage will now more than likely be considerably worn, causing the linkage system to feel “sloppy”. There are other kits available which replace the plastic bushes with bronze equivalents but the spring washer design is still utilized, along with the original large shanked bolt.

    Only by changing the design of the pivot system (by using this kit) can the sloop be reduced entirely.

    (1 review)
    £31.03 + VAT Add to cart
  • 205 / 309

    205 Grp.N Top Engine Mount inc. Buffers

    EMB205-2 – Group N Top Engine Mount – a part of our complete Group N (Grp.N) Engine Mounting Kit that has been designed to substantially reduce engine movement by incorporating up-rated and stiffened rubber components. The kit is ideally used for rallying, racing, enhanced engine conversions and modifications.

    Note: The top mount comes with a pair of EMB205-5 top mount buffers.

    Available for: 205 1.6/1.9 GTI, 205 XS (please choose when adding products to cart)

    (0 reviews)
    £42.27 + VAT Select options