205 Grp.A Rear Beam Mount Kit

Code: SMB205-3

 

 

Replaces standard rubber joints and mounts on all the mounting points of a rear beam.

Fitting this kit means the rear beam is rigidly attached to the chassis. Giving a more predictable rear end under heavy cornering and more control during lift off over steer.

Front flexible joints are replaced by acetal bushes (4 in the kit) while rear rubber “sandwich” mounts are replaced with “aircraft spec” quality aluminium blocks with offset studs (2 in the kit). This kit is an evolution and improved fit version of our original BBM-SA-R kit. Unlike standard items, our uprated items will not wear out!

This modification is a real benefit to a track orientated 205/309. It will also benefit a road car with respect to handling characteristics but at an expense of a slight increase in road noise experienced in the cabin.

Suitable for: Peugeot 205 GTI and 309 GTI.

£69.02 + VAT

In Stock
Share (0)
Total: 0 Total: 0 Total: 0 Total: 0 Total: 0 Total: 0

Additional information

Weight 1 kg

Related products

  • 205 / 309

    205 GTI CNC Bent Steel Fuel Lines

    Due to their location the steel fuel lines on the 205 Gti are prone to rust.

    Using original OE under body fuel lines we have re-manufactured them using a CNC tube bender. Using CNC technology ensures their complicated shape is repeatably replicated accurately.

    These lines are a direct fitment onto the standard clips, neatly routing the fuel lines as Peugeot intended. They are sold as pairs. 1x Feed and 1x Return. The feed line has the correct union at the bulkhead end to match either the OE Peugeot rubber fuel-filter hose or our remanufactured rubber hoses.

     

    (1 review)
    £79.18 + VAT Add to cart
  • 205 / 309

    205 Bronze L-linkage Pivot Bush Kit GTI

    The original linkage setup consists of two plastic bushes and a spring washer, even when new this setup had a lot of unwanted play in it. The linkage will now more than likely be considerably worn, causing the linkage system to feel “sloppy”. There are other kits available which replace the plastic bushes with bronze equivalents but the spring washer design is still utilized, along with the original large shanked bolt.

    Only by changing the design of the pivot system (by using this kit) can the sloop be reduced entirely.

    (1 review)
    £31.03 + VAT Add to cart
  • 205 / 309

    205 Grp.N Engine Mounting Kit

    EMB205-1 – Complete Group N (Grp.N) Engine Mounting Kit has been designed to substantially reduce engine movement by incorporating up-rated and stiffened rubber components. The kit is ideally used for rallying, racing, enhanced engine conversions and modifications.

    Contents of the kit also available individually.

    Available for: 205 1.6/1.9 GTI, 205 XS (please note when adding products to cart)

     

    (0 reviews)
    £105.40 + VAT Select options
  • 205 / 309

    205 Fast Road Engine Mounting Kit

    EMB205-9 – Our 205 Gti Grp.N engine mounting kit has been one of our main sellers for over 10 years. It is perfect for track orientated cars but on the firm side for road cars.

    We have now developed our fast road set-up. A great upgrade for people looking to tighten up the engine movement but without going to the extreme of the Grp.N set-up.

    The mounts use the same proven design as our Grp.N set-up but with a softer grade of rubber to aid compliance.

    Available for: 205 1.6/1.9 GTI, 205 XS (please note when adding products to cart)

     

    (0 reviews)
    £100.05 + VAT Select options