205 Bronze Gearstick Pivot Bushes Gti and Non Gti

Code: GLP205 3

Fitment: Suitable for the 205 Gti and Non Gti.

 

 

 

 

These bronze bushes replace the standard plastic ones found in the gearstick pivot point. These will not flex or distort and therefore reduce play in the linkage system.

Notes: Ideally to be used with our 205 Gearchange Rods (3-rod kit) and 205 Bronze L-linkage Pivot Bush Kit, as well as Adjustable Quickshift.

Sold in pairs as pictured

£14.98 + VAT

In Stock
Share (0)
Total: 0 Total: 0 Total: 0 Total: 0 Total: 0 Total: 0

Additional information

Weight 0.05 kg

Related products

  • 205 / 309

    205 / 106 Grp.N Lower Engine Fork Bush

    We have designed and manufactured this bush to offer a firmer option than the standard item (e.g. reduce engine movement), whilst still retaining some compliance compared to our Grp.A Bush. This product compliment’s Grp.N Full Engine Mounting Kit.

    Location: This bush is located within the fork which connects the subframe to the lower engine bush.

    Suitable For:

    • Fits all 106 and 205 models incl. GTi
    • Direct replacement for original

    Spec:

    • 70 shore natural rubber
    • Fully stressed relieved
    • Centreless ground outer diameter

     

    (0 reviews)
    £19.05 + VAT Select options
  • 205 / 309

    205 GTI Rubber Fuel Lines

    Our Rubber fuel lines are remanufactured so they are a direct replacement for standard hoses.

    They are sold as a pair:

    • The short hose runs from the steel fuel line to the bottom of the fuel filter
    • The longer hose runs from the top of the fuel filter to the fuel rail

    Both hoses come with new banjo bolts and crush washers.

    Please note: We have changed the rubber spec to Gates SAE 30R14 T2  since June 2020.   Using this rubber spec our rubber fuel lines are now compatible with E10 grade fuel.  However, we would still advise customers to use E5 Super unleaded as there are other parts in the fuel system that may not be compatible with E10 unleaded.

    (0 reviews)
    £48.69 + VAT Add to cart
  • 205 / 309

    205 Grp.A Rear Beam Mount Kit

     

     

    Replaces standard rubber joints and mounts on all the mounting points of a rear beam.

    Fitting this kit means the rear beam is rigidly attached to the chassis. Giving a more predictable rear end under heavy cornering and more control during lift off over steer.

    Front flexible joints are replaced by acetal bushes (4 in the kit) while rear rubber “sandwich” mounts are replaced with “aircraft spec” quality aluminium blocks with offset studs (2 in the kit). This kit is an evolution and improved fit version of our original BBM-SA-R kit. Unlike standard items, our uprated items will not wear out!

    This modification is a real benefit to a track orientated 205/309. It will also benefit a road car with respect to handling characteristics but at an expense of a slight increase in road noise experienced in the cabin.

    Suitable for: Peugeot 205 GTI and 309 GTI.

    (0 reviews)
    £69.02 + VAT Add to cart
  • 205 / 309

    205 Grp.N Engine Mounting Kit

    EMB205-1 – Complete Group N (Grp.N) Engine Mounting Kit has been designed to substantially reduce engine movement by incorporating up-rated and stiffened rubber components. The kit is ideally used for rallying, racing, enhanced engine conversions and modifications.

    Contents of the kit also available individually.

    Available for: 205 1.6/1.9 GTI, 205 XS (please note when adding products to cart)

     

    (0 reviews)
    £105.40 + VAT Select options