This bracket offers support to the air box. Because of its location ( Above the exhaust / manifold ) it is very common for it to rust / break where it mounts to the manifold.
No Longer available from Peugeot.
Available in both Mild steel and Stainless steel. Both are power coated.
Suitable for: 205 1.6/1.9 GTI
We have designed and manufactured this bush to offer a firmer option than the standard item (e.g. reduce engine movement), whilst still retaining some compliance compared to our Grp.A Bush. This product compliment’s Grp.N Full Engine Mounting Kit.
Location: This bush is located within the fork which connects the subframe to the lower engine bush.
Replaces standard rubber joints and mounts on all the mounting points of a rear beam.
Fitting this kit means the rear beam is rigidly attached to the chassis. Giving a more predictable rear end under heavy cornering and more control during lift off over steer.
Front flexible joints are replaced by acetal bushes (4 in the kit) while rear rubber “sandwich” mounts are replaced with “aircraft spec” quality aluminium blocks with offset studs (2 in the kit). This kit is an evolution and improved fit version of our original BBM-SA-R kit. Unlike standard items, our uprated items will not wear out!
This modification is a real benefit to a track orientated 205/309. It will also benefit a road car with respect to handling characteristics but at an expense of a slight increase in road noise experienced in the cabin.
EMB205-9 – Our 205 Gti Grp.N engine mounting kit has been one of our main sellers for over 10 years. It is perfect for track orientated cars but on the firm side for road cars.
We have now developed our fast road set-up. A great upgrade for people looking to tighten up the engine movement but without going to the extreme of the Grp.N set-up.
The mounts use the same proven design as our Grp.N set-up but with a softer grade of rubber to aid compliance.
Available for: 205 1.6/1.9 GTI, 205 XS (please note when adding products to cart)
EMB205-4 – 205 Grp.N Lower Engine Bush – a part of our complete Group N (Grp.N) Engine Mounting Kit has been designed to substantially reduce engine movement by incorporating up-rated and stiffened rubber components. The kit is ideally used for rallying, racing, enhanced engine conversions and modifications.
Available for: 205 1.6/1.9 GTI, 205 XS (please select when adding products to cart)