205 Gti Front Bumper Mounting Kit

Code: BW205-4

The various parts which make up the 205 Gti Front bumper mounting system are prone to rust. If you are removing the front bumper you will more than likely find a lot of the parts unusable on the rebuild. Most of which is not available from Peugeot anymore.

We have re-manufactured the complete bumper mounting kit, most of which in stainless steel. So the bumper can be removed and re-fitted in the future without the risk of damaging the now hard to find plastic bumpers!

£192.50 + VAT

In Stock
Share (0)
Total: 0 Total: 0 Total: 0 Total: 0 Total: 0 Total: 0

Description

The kit also contains 4 T-bolts:

Additional information

Weight 3 kg

You may also like…

Related products

  • 205 / 309

    205 / 106 Grp.N Lower Engine Fork Bush

    We have designed and manufactured this bush to offer a firmer option than the standard item (e.g. reduce engine movement), whilst still retaining some compliance compared to our Grp.A Bush. This product compliment’s Grp.N Full Engine Mounting Kit.

    Location: This bush is located within the fork which connects the subframe to the lower engine bush.

    Suitable For:

    • Fits all 106 and 205 models incl. GTi
    • Direct replacement for original

    Spec:

    • 70 shore natural rubber
    • Fully stressed relieved
    • Centreless ground outer diameter

     

    (0 reviews)
    £20.19 + VAT Select options
  • 205 / 309

    205 Gearchange Rods (3-rod kit)

    Joints in the original gearchange rod setup contain plastic bushes that wear over time, making the gearchange very unprecise and leading to rods popping off and leaving you stranded on a side of the road or track. Our rods are steel-jointed with securing clips that cures both issues.

    Suitable for: 205 1.6/1.9 GTI

    (0 reviews)
    £47.64 + VAT Add to cart
  • 205 / 309

    205 GTI Fuel Line + P.A.S. Pipe Clips

    Original Peugeot Clips. We have bought a large batch from Peugeot as they often need replacing when fitting our new fuel lines or P.A.S cooling loop pipe.

    They are sold individually – please enter the desired quantity when ordering.

    • 6x clips are needed to replace all the fuel lines under the car
    • 4x Clips are needed to replace the P.A.S cooling loop (1.9 GTI models only)

    (0 reviews)
    £2.39 + VAT Add to cart
  • 205 / 309

    205 GTI Rubber Fuel Lines

    Our Rubber fuel lines are remanufactured so they are a direct replacement for standard hoses.

    They are sold as a pair:

    • The short hose runs from the steel fuel line to the bottom of the fuel filter
    • The longer hose runs from the top of the fuel filter to the fuel rail

    Both hoses come with new banjo bolts and crush washers.

    Please note: We have changed the rubber spec to Gates SAE 30R14 T2  since June 2020.   Using this rubber spec our rubber fuel lines are now compatible with E10 grade fuel.  However, we would still advise customers to use E5 Super unleaded as there are other parts in the fuel system that may not be compatible with E10 unleaded.

    (0 reviews)
    £51.61 + VAT Add to cart