16v Crank Pulley with Trigger Wheel

Code: LCP205-4

Using our Crank pulley with Trigger wheel eliminates the need for the original heavy trigger pick-ups found on the flywheel of Mi16/S16/T16 engines.

Our aluminium crank pulleys are made from 7075 T6 aluminium, which is extremely strong and wear resistant. The pulleys incorporate the original style timing hole and are anodised black.

The steel timing rings are a 36-1 tooth design (This is the most common ignition pickup style supported by aftermarket management systems).

The rings are accurately laser cut from 3mm steel. Then zinc plated to offer rust protection.

We have designed a 4-point clamping system to eliminate slip. The ring can be clamped at any increment between 0-360 degrees meaning you can match the trigger wheel to your existing setting, if you already run a trigger wheel.

All our pulleys are CNC machined in house.

We will be developing a bracket for the sensor pickup soon. Please contact us for more details.

Note: This product is used with an aftermarket management system

£99.01 + VAT

In Stock
Share (0)
Total: 0 Total: 0 Total: 0 Total: 0 Total: 0 Total: 0

Description

Trigger Wheel

Trigger Wheel

Additional information

Weight 0.80 kg

Related products

  • 205 / 309

    205 GTI Engine Mount Shim Kit

    Shims are placed behind buffers to space them closer to the top engine mount.

    Fitting the correct combination of shims means, as the engine moves under acceleration / engine braking the top mount can come into contact with the buffers sooner and reduce any excess movement.

    These can be used with OE std buffers or either of our Fast Road or GrpN Style replacements.

     

    Available for: 205 1.6/1.9 GTI, 205 XS

    (0 reviews)
    £7.70 + VAT Add to cart
  • 205 / 309

    205 / 106 Grp.A Lower Engine Fork Bush

    This is the one bush which gets over looked when the engine mounts are uprated. The original bush is usually worn and allows unnecessary engine movement for race/rally/trackday setups.

    Location: This bush is located within the fork which connects the subframe to the lower engine bush.

    Suitable For:

    • Fits all 106 and 205 models incl. GTi
    • Direct replacement for original

    For a more compliant version of the bush, take a look at the Grp.N version.

    (0 reviews)
    £20.87 + VAT Select options
  • 205 / 309

    205 GTI Fuel Line + P.A.S. Pipe Clips

    Original Peugeot Clips. We have bought a large batch from Peugeot as they often need replacing when fitting our new fuel lines or P.A.S cooling loop pipe.

    They are sold individually – please enter the desired quantity when ordering.

    • 6x clips are needed to replace all the fuel lines under the car
    • 4x Clips are needed to replace the P.A.S cooling loop (1.9 GTI models only)

    (0 reviews)
    £2.25 + VAT Add to cart
  • 205 / 309

    205 Bronze Gearstick Pivot Bushes Gti and Non Gti

    Fitment: Suitable for the 205 Gti and Non Gti.

     

     

     

     

    These bronze bushes replace the standard plastic ones found in the gearstick pivot point. These will not flex or distort and therefore reduce play in the linkage system.

    Notes: Ideally to be used with our 205 Gearchange Rods (3-rod kit) and 205 Bronze L-linkage Pivot Bush Kit, as well as Adjustable Quickshift.

    Sold in pairs as pictured

    (0 reviews)
    £14.98 + VAT Add to cart