Red
Showing 10–18 of 19 results
-
405 / BX
BX 16v Silicone Induction Hose
This hose replaces the original worn rubber hose. The hose is made from 3ply silicone (4mm wall thickness).
The hose is Fluoro Lined to stop any damage from contact with oil.
Colour choice: Only available in Black
(0 reviews)£63.00 + VAT Select options -
Silicone Breather Hoses
Mi16/BX 16v Silicone Oil Breather Hose Kit
These hoses replace the original worn rubber set, ensuring the highest oil breather system reliability possible. The hoses are made from 3ply silicone (4mm wall thickness).
The kit comprises of following 3 hoses.
Colour choice: Blue, Black or Red
Suitable for RHD and LHD set-ups.
(0 reviews)£92.98 – £101.11 + VAT Select options -
405 / BX
BX 16v Silicone Coolant Hoses Kit
The hoses are made from 3ply Silicone (4mm wall thickness).
Complete Silicone Coolant Hose kit for the Citroen Bx16v. Includes all 12 hoses in the system.
BakerBM unique Bleed Screw design is utilizes, ensuring the coolant system performance as Peugeot intended.
The kit includes the following hoses:
- Thermostat housing – Top Heater rail
- Lower Heater Rail – Distribution Block
- Top Heater Matrix – Rail on Bulkhead
- Header Tank – Rad & Throttle Body (with bleed Screw)
- Header Tank – Lower Rad Hose
- Lower Rad – Engine (includes takoff)
- Top Rad – Thermostat Hose
- Heat exchanger – Rad
- Heat exchanger – Thermostat
- Thermostat – Throttle body
- Lower Heater Matrix
- Side of thermostat – Heater rail
Colour choice: Only available in black at the moment!
(0 reviews)£278.20 – £286.33 + VAT Select options -
205 / 309
GTi-6 Silicone Oil Breather Hose Kit
Complete Oil breather hose kit to replace the original oil breather hoses on the 306Gti-6 engine, ensuring the highest oil breather system reliability possible. Made to the same high standards as our other long established Silicone hose kits. Contents: The kit comprises of 5 hoses. Colour choice: Blue, Black or Red Suitable for RHD and LHD set-ups.
(0 reviews)£108.26 + VAT Select options -
205 / 309
205 GTi-6 Silicone Coolant Hoses Kit
Complete Coolant hose Kit to suit 205 GTis fitted with the 2.0 Gti-6 Engine found in the Peugeot 306 Gti-6 or Citroen Xsara VTS.
In recent years, transplanting the Gti-6 engine into a 205 Gti has become very popular. Until now there has not been a coolant kit available for this conversion. We have designed RHD and LHD specific kits.
This kit includes all the coolant hoses in the 205 Gti-6 system. Making the coolant installation quick neat and very reliable.
Note: We will supply a 32mm internal diameter inner wing to water distribution block hose in this kit. Dependent upon parts used in the conversion, a 36mm hose can sometimes be required. If this is the case just let us know at the point of order and we will substitute this one in the kit for you.
Colour choice: Blue, Black or Red
(0 reviews)£194.72 + VAT Select options -
205 / 309
205 Mi16 Shortened Silicone Induction Hose
Many 205GTI’s now run with the 1905cc Mi16 Engine. One issue with this conversion is having enough space to comfortably fit the air filter behind the headlight. Using the original 405 Mi16 intake hose makes for a very tight fit and will not do anything to benefit the breathing of the engine.
A lot of the original rubber intake hoses are now showing their age. It is not uncommon for them to split and cause hard to diagnose running issues.
The Benefits of this new Silicone hose are as follows:
- 150mm shorter than the original. Resulting in the air filter fitment not being so cramped!
- The Oval end of the hose includes a ridge on the inside, which seals to the throttle body in a similar way to the original.
- Both Aluminium fittings are CNC turned with the correct I.D.’s so the oil breather system will perform like Peugeot Intended
- The Inner part of the hose is Fluoro Lined to stop any damage to the hose caused by the oil vapour
Colour choice: Blue, Black or Red
(0 reviews)£62.06 + VAT Select options -
405 / BX
405 Mi16 Silicone Coolant Hoses Kit
The hoses are made from 3ply Silicone (4mm wall thickness).
Complete Silicone Coolant Hose kit for the 405 Mi16 . Includes all 11 hoses in the system.
The kit includes the following hoses:
- Top Heater Rail
- Lower Heater Rail
- Lower Heater Matrix – Thermostat
- Heat Exchanger to Thermostat
- Thermostat – Throttle body
- Top Rad – Thermostat
- Lower Rad – Dist Block
- Lower Exp. (side of rad) – Dist Block
- Heat Exchanger – Rad
- Top Heater Matrix – Dist Block
- Throttle Body – Rad
Colour choice: Blue, Black or Red
(0 reviews)£215.03 + VAT Select options -
-
205 / 309
205 8v Silicone Supplementary Device (SAD) Hoses
Direct replacement hoses for the “Supplementary Air Device” system found on all pre-CAT 205/309 GTI’s. These hoses are the same for RHD and LHD models. Both hoses are Fluro lined to prevent damage caused from any contact with oil.
Contents: Two replacement hoses to run from the SAD valve to Inlet track.
These hoses are suitable for all 205/309 1.6/1.9 GTI’s.
Colour choice: Blue, Black or Red
(0 reviews)£41.73 + VAT Select options