All 4 panels
Showing 82–90 of 102 results
-
205 / 309205 Gearchange Rods (3-rod kit)
Joints in the original gearchange rod setup contain plastic bushes that wear over time, making the gearchange very unprecise and leading to rods popping off and leaving you stranded on a side of the road or track. Our rods are steel-jointed with securing clips that cures both issues.
Suitable for: 205 1.6/1.9 GTI
(0 reviews)£44.94 + VAT Add to cart -
205 / 309205 Bronze Gearstick Pivot Bushes Gti and Non Gti
Fitment: Suitable for the 205 Gti and Non Gti.
These bronze bushes replace the standard plastic ones found in the gearstick pivot point. These will not flex or distort and therefore reduce play in the linkage system.
Notes: Ideally to be used with our 205 Gearchange Rods (3-rod kit) and 205 Bronze L-linkage Pivot Bush Kit, as well as Adjustable Quickshift.
Sold in pairs as pictured
(0 reviews)£14.98 + VAT Add to cart -
205 / 309205 Bronze L-linkage Pivot Bush Kit GTI
The original linkage setup consists of two plastic bushes and a spring washer, even when new this setup had a lot of unwanted play in it. The linkage will now more than likely be considerably worn, causing the linkage system to feel “sloppy”. There are other kits available which replace the plastic bushes with bronze equivalents but the spring washer design is still utilized, along with the original large shanked bolt.
Only by changing the design of the pivot system (by using this kit) can the sloop be reduced entirely.
(1 review)£31.03 + VAT Add to cart -
205 / 309205 / 309 Adjustable Quickshift
The adjustable quickshift is a direct replacement for the standard L-Linkage attached to the subframe.
Suitable for: All 205 GTI and 309 GTI Models
Note: The GLP205-2 Bronze L-linkage Pivot Bush Kit is included in the quickshift price.
(0 reviews)£50.83 + VAT Add to cart -
205 / 309205 GTI Fuel Line + P.A.S. Pipe Clips
Original Peugeot Clips. We have bought a large batch from Peugeot as they often need replacing when fitting our new fuel lines or P.A.S cooling loop pipe.
They are sold individually – please enter the desired quantity when ordering.
- 6x clips are needed to replace all the fuel lines under the car
- 4x Clips are needed to replace the P.A.S cooling loop (1.9 GTI models only)
(0 reviews)£2.25 + VAT Add to cart -
205 / 309205 GTI Power Steering Cooling Loop
This is the power steering cooling loop pipe which runs under the car on 205 GTI models equipped with PAS. The originals are prone to rust due to their location.
Using an original we have re-manufactured them using a CNC tube bender, then a custom jig has been made to manipulate the final bend. Using CNC technology ensures their complicated shape is repeatedly replicated accurately.
Manufacturing process:
- Steel tube is CNC bent to match original shape
- The lines are then Chromium 6-free plated
- Clean pelleted (cleans inside tube)
(0 reviews)£41.52 + VAT Add to cart -
205 / 309205 GTI CNC Bent Steel Fuel Lines
Due to their location the steel fuel lines on the 205 Gti are prone to rust.
Using original OE under body fuel lines we have re-manufactured them using a CNC tube bender. Using CNC technology ensures their complicated shape is repeatably replicated accurately.
These lines are a direct fitment onto the standard clips, neatly routing the fuel lines as Peugeot intended. They are sold as pairs. 1x Feed and 1x Return. The feed line has the correct union at the bulkhead end to match either the OE Peugeot rubber fuel-filter hose or our remanufactured rubber hoses.
(1 review)£79.18 + VAT Add to cart -
205 / 309205 Torsion Bar End Stop
The torsion bar end stops screw into the rear axle beam tube. They act as a end stop for the torsion bar screw
They are a direct replacement for the standard item. Two are required per axle.
Note: Sold individually – increase quantity to buy more than one.
(0 reviews)£3.85 + VAT Add to cart -
205 / 309205 Offset Washer
The offset washer is used to locate one end of the torsion bar into the trailing arm. These are prone to damage on removal.
They are a direct replacement for the standard item. Two are required per axle.
Note: Sold individually – increase quantity to buy more than one.
(0 reviews)£1.18 + VAT Add to cart
