These hoses replace the original worn rubber set, ensuring the highest oil breather system reliability possible. The hose is made from 3ply silicone (4mm wall thickness).
The hoses are Fluoro Lined to stop any damage from contact with oil.
Joints in the original gearchange rod setup contain plastic bushes that wear over time, making the gearchange very unprecise and leading to rods popping off and leaving you stranded on a side of the road or track. Our rods are steel-jointed with securing clips that cures both issues.
This hose is intended for the 106 S1 Rallye which is fitted with the heat exchanger.
BakerBM have developed their I.D. reducer which is an integral part of this type of hose. The I.D. reducer directs the flow of water around the Heat Exchanger and means the high efficiency of the Heat Exchanger is retained.
This hose is no longer available from Peugeot. We have made a short run of these hoses to test the market. Don’t miss out on your chance to get a spare!
The hoses are made from 3ply Silicone (4mm wall thickness).