Fitment: 205 Gti Silicone or rubber coolant hose kits
These Mikalor clips have a cold-formed stamped band thread, smoothed on the underside. Combined with the bevelled band edges protects the hose from any damage.
We have designed and manufactured this bush to offer a firmer option than the standard item (e.g. reduce engine movement), whilst still retaining some compliance compared to our Grp.A Bush. This product compliment’s Grp.N Full Engine Mounting Kit.
Location: This bush is located within the fork which connects the subframe to the lower engine bush.
These bronze bushes replace the standard plastic ones found in the gearstick pivot point. These will not flex or distort and therefore reduce play in the linkage system.
Notes: Ideally to be used with our 205 Gearchange Rods (3-rod kit) and 205 Bronze L-linkage Pivot Bush Kit, as well as Adjustable Quickshift.
Shims are placed behind buffers to space them closer to the top engine mount.
Fitting the correct combination of shims means, as the engine moves under acceleration / engine braking the top mount can come into contact with the buffers sooner and reduce any excess movement.
These can be used with OE std buffers or either of our Fast Road or GrpN Style replacements.
Original Peugeot Clips. We have bought a large batch from Peugeot as they often need replacing when fitting our new fuel lines or P.A.S cooling loop pipe.
They are sold individually – please enter the desired quantity when ordering.
6x clips are needed to replace all the fuel lines under the car
4x Clips are needed to replace the P.A.S cooling loop (1.9 GTI models only)