After your 205 Gti has undergone a full respray you will be missing the origianl stickers.
We can now offer the following sticker set to get your car one step closer to how it looked when it left the show room.
10 sticker set is suitable for both the 1.6 and 1.9 Gti.
| Weight | 0.01 kg |
|---|
Due to their location the steel fuel lines on the 205 Gti are prone to rust.
Using original OE under body fuel lines we have re-manufactured them using a CNC tube bender. Using CNC technology ensures their complicated shape is repeatably replicated accurately.
These lines are a direct fitment onto the standard clips, neatly routing the fuel lines as Peugeot intended. They are sold as pairs. 1x Feed and 1x Return. The feed line has the correct union at the bulkhead end to match either the OE Peugeot rubber fuel-filter hose or our remanufactured rubber hoses.
Direct replacement hoses for the “Supplementary Air Device” system found on all pre-CAT 205/309 GTI’s. These hoses are the same for RHD and LHD models.
Contents: Two replacement hoses to run from the SAD valve to Inlet track.
These hoses are suitable for all 205/309 1.6/1.9 GTI’s and available as a kit or individually – please select when adding to shopping cart.
Colour: Black
These hoses replace the original worn rubber set, ensuring the highest oil breather system reliability possible.
The kit comprises of following 5 hoses:
This kit is suitable for all 205/309 1.6/1.9 GTI’s.
Hose No.1 is over £70 from Peugeot alone. Some of the others are no longer available from Peugeot.
All hoses can be sold separate. Please take a look at our individual hose selector.
We have designed and manufactured this bush to offer a firmer option than the standard item (e.g. reduce engine movement), whilst still retaining some compliance compared to our Grp.A Bush. This product compliment’s Grp.N Full Engine Mounting Kit.
Location: This bush is located within the fork which connects the subframe to the lower engine bush.
Suitable For:
Spec:
EMB205-2 – Group N Top Engine Mount – a part of our complete Group N (Grp.N) Engine Mounting Kit that has been designed to substantially reduce engine movement by incorporating up-rated and stiffened rubber components. The kit is ideally used for rallying, racing, enhanced engine conversions and modifications.
Note: The top mount comes with a pair of EMB205-5 top mount buffers.
Available for: 205 1.6/1.9 GTI, 205 XS (please choose when adding products to cart)
The original linkage setup consists of two plastic bushes and a spring washer, even when new this setup had a lot of unwanted play in it. The linkage will now more than likely be considerably worn, causing the linkage system to feel “sloppy”. There are other kits available which replace the plastic bushes with bronze equivalents but the spring washer design is still utilized, along with the original large shanked bolt.
Only by changing the design of the pivot system (by using this kit) can the sloop be reduced entirely.
This pulley is of a light weight design which will reduce rotation mass, thus improve throttle response. A great addition to a lightened flywheel.
Suitable for: 205/309 GTI.
Description:
EMB205-5 – Group N Top Mount Buffer – a part of our complete Group N (Grp.N) Engine Mounting Kit that has been designed to substantially reduce engine movement by incorporating up-rated and stiffened rubber components. The kit is ideally used for rallying, racing, enhanced engine conversions and modifications.
Note: Additional individual buffer. Add quantity for more.
Fitment for: 205 1.6/1.9 GTI, 205 XS