205 Gti Induction Hoses in rubber.
Fitment. Model 205 Gti 1.6 & 1.9. All Years
Split induction hoses are starting to become an issue on the 205 Gti.
Original 30+ year old rubber hoses are cracking and causing air leaks within the induction system.
We have re-manufactured all 3 of induction hoses. Using the latest 3-D scanning technologies we have produced a hose that will not look out of place in any concourse build!
Here you can choose between:
1) Slam Panel to Air Box Hose
2) Air Box to Air Flow Meter Hose
3) Air Flow Meter to Inlet Manifold Hose
All hoses are a direct replacement for the originals, and can be supplied with new clips. Just select from the drop down menu.
£37.03 – £56.47 + VAT
In StockAdditional information
Weight | 1.5 kg |
---|---|
Individual Induction Hose Selection | Slam Panel to Air Box, Air Box to Airflow Meter, Airflow Meter to Throttle Body |
Add Clips | Yes, No |
Related products
-
205 / 309
205 / 106 Grp.A Lower Engine Fork Bush
This is the one bush which gets over looked when the engine mounts are uprated. The original bush is usually worn and allows unnecessary engine movement for race/rally/trackday setups.
Location: This bush is located within the fork which connects the subframe to the lower engine bush.
Suitable For:
- Fits all 106 and 205 models incl. GTi
- Direct replacement for original
For a more compliant version of the bush, take a look at the Grp.N version.
(0 reviews)£20.87 + VAT Select options -
205 / 309
205 Grp.N Front Strut Top Rubbers
These uprated rubbers replace standard soft rubbers in the shock absorbers top mounts, located just under strut turrets.
The rubbers are constructed to a very high standard using a rubber compound (with an increased Shore Rating over original), which is considerably firmer than the standard rubbers, making them far stiffer. They give firmer ride and less front suspension flex.
The strut rubbers come as a pair.
Suitable for: Peugeot 205 GTI and 309 GTI.
(0 reviews)£20.12 + VAT Add to cart -
205 / 309
205 Bronze L-linkage Pivot Bush Kit GTI
The original linkage setup consists of two plastic bushes and a spring washer, even when new this setup had a lot of unwanted play in it. The linkage will now more than likely be considerably worn, causing the linkage system to feel “sloppy”. There are other kits available which replace the plastic bushes with bronze equivalents but the spring washer design is still utilized, along with the original large shanked bolt.
Only by changing the design of the pivot system (by using this kit) can the sloop be reduced entirely.
Rated 5.00 out of 5(1 review)£31.03 + VAT Add to cart -
205 / 309
205 GTI Fuel Line + P.A.S. Pipe Clips
Original Peugeot Clips. We have bought a large batch from Peugeot as they often need replacing when fitting our new fuel lines or P.A.S cooling loop pipe.
They are sold individually – please enter the desired quantity when ordering.
- 6x clips are needed to replace all the fuel lines under the car
- 4x Clips are needed to replace the P.A.S cooling loop (1.9 GTI models only)
(0 reviews)£2.25 + VAT Add to cart