RH205-4 - Rubber S.A.D. Hoses Kit
Showing 100–108 of 115 results
-
205 / 309205 GTI Power Steering Cooling Loop
This is the power steering cooling loop pipe which runs under the car on 205 GTI models equipped with PAS. The originals are prone to rust due to their location.
Using an original we have re-manufactured them using a CNC tube bender, then a custom jig has been made to manipulate the final bend. Using CNC technology ensures their complicated shape is repeatedly replicated accurately.
Manufacturing process:
- Steel tube is CNC bent to match original shape
- The lines are then Chromium 6-free plated
- Clean pelleted (cleans inside tube)
(0 reviews)£41.52 + VAT Add to cart -
205 / 309205 GTI CNC Bent Steel Fuel Lines
Due to their location the steel fuel lines on the 205 Gti are prone to rust.
Using original OE under body fuel lines we have re-manufactured them using a CNC tube bender. Using CNC technology ensures their complicated shape is repeatably replicated accurately.
These lines are a direct fitment onto the standard clips, neatly routing the fuel lines as Peugeot intended. They are sold as pairs. 1x Feed and 1x Return. The feed line has the correct union at the bulkhead end to match either the OE Peugeot rubber fuel-filter hose or our remanufactured rubber hoses.
(1 review)£79.18 + VAT Add to cart -
205 / 309205 Torsion Bar End Stop
The torsion bar end stops screw into the rear axle beam tube. They act as a end stop for the torsion bar screw
They are a direct replacement for the standard item. Two are required per axle.
Note: Sold individually – increase quantity to buy more than one.
(0 reviews)£3.85 + VAT Add to cart -
205 / 309205 Offset Washer
The offset washer is used to locate one end of the torsion bar into the trailing arm. These are prone to damage on removal.
They are a direct replacement for the standard item. Two are required per axle.
Note: Sold individually – increase quantity to buy more than one.
(0 reviews)£1.18 + VAT Add to cart -
205 / 309205 Torsion Bar Adjuster Screw
Features:
- Essential part of the rear beam assembly
- In-house CNC machined
- Plated to provide rust protection
- Two torsion bar screws are needed per beam
Note: Sold individually – increase quantity in order to buy more than one.
(0 reviews)£4.07 + VAT Add to cart -
205 / 309205 Adjustable Top Mounts
Our extremely popular 205-specific adjustable top suspension mounts.
Suitable for: Peugeot 205 all models.
Description:
- These are intended for use with coilover suspension.
- Material 7075 T6 Aluminium.
- Fully CNC machined in house using the latest CAM technology.
- They house a 42mm O/D Heavy Duty Spherical Bearing.
- Camber adjustment available is from 0 – neg.3 degrees
- Caster fixed at 4.5 Degrees Positive.
- Engraved camber scale giving an indication of adjustment position.
- Bearing reliefs are machined into the housing, making bearing changes quick and easy.
- Anodised.
- These are supplied with M14 Fittings – please email us at contact@bakerbm.com should you require M12
(0 reviews)£230.05 + VAT Add to cart -
205 / 309205 Grp.A Rear Beam Mount Kit
Replaces standard rubber joints and mounts on all the mounting points of a rear beam.
Fitting this kit means the rear beam is rigidly attached to the chassis. Giving a more predictable rear end under heavy cornering and more control during lift off over steer.
Front flexible joints are replaced by acetal bushes (4 in the kit) while rear rubber “sandwich” mounts are replaced with “aircraft spec” quality aluminium blocks with offset studs (2 in the kit). This kit is an evolution and improved fit version of our original BBM-SA-R kit. Unlike standard items, our uprated items will not wear out!
This modification is a real benefit to a track orientated 205/309. It will also benefit a road car with respect to handling characteristics but at an expense of a slight increase in road noise experienced in the cabin.
Suitable for: Peugeot 205 GTI and 309 GTI.
(0 reviews)£69.02 + VAT Add to cart -
205 / 309205 Grp.N Front Strut Top Rubbers
These uprated rubbers replace standard soft rubbers in the shock absorbers top mounts, located just under strut turrets.
The rubbers are constructed to a very high standard using a rubber compound (with an increased Shore Rating over original), which is considerably firmer than the standard rubbers, making them far stiffer. They give firmer ride and less front suspension flex.
The strut rubbers come as a pair.
Suitable for: Peugeot 205 GTI and 309 GTI.
(0 reviews)£20.12 + VAT Add to cart -
205 / 309205 Fast Road Engine Mounting Kit
EMB205-9 – Our 205 Gti Grp.N engine mounting kit has been one of our main sellers for over 10 years. It is perfect for track orientated cars but on the firm side for road cars.
We have now developed our fast road set-up. A great upgrade for people looking to tighten up the engine movement but without going to the extreme of the Grp.N set-up.
The mounts use the same proven design as our Grp.N set-up but with a softer grade of rubber to aid compliance.
Available for: 205 1.6/1.9 GTI, 205 XS (please note when adding products to cart)
(0 reviews)£100.05 + VAT Select options
