CNC machined aluminium pins to replace the plastic pins, which very often break off during panel removal.
The pins are made from 6082T6 and have milled grooves on the back of the heads, which align with the webbing on the panel.
A small amount of adhesive is needed to hold them in to place.
Ordering instructions: Price is £8.56 + VAT for 3 pins (3 pins per panel).
Each panel is handed so please specify which side you require.
If you require both – please order a “Full Set”.
£8.56 – £17.12 + VAT
In StockAdditional information
Weight | 0.1 kg |
---|---|
Please select type and quantity: | A full set of pins (Both sides), A set of 3 pins (Left side), A set of 3 pins (Right side) |
Related products
-
205 / 309
205 Bronze L-linkage Pivot Bush Kit GTI
The original linkage setup consists of two plastic bushes and a spring washer, even when new this setup had a lot of unwanted play in it. The linkage will now more than likely be considerably worn, causing the linkage system to feel “sloppy”. There are other kits available which replace the plastic bushes with bronze equivalents but the spring washer design is still utilized, along with the original large shanked bolt.
Only by changing the design of the pivot system (by using this kit) can the sloop be reduced entirely.
Rated 5.00 out of 5(1 review)£31.03 + VAT Add to cart -
205 / 309
205 GTI Rubber Fuel Lines
Our Rubber fuel lines are remanufactured so they are a direct replacement for standard hoses.
They are sold as a pair:
- The short hose runs from the steel fuel line to the bottom of the fuel filter
- The longer hose runs from the top of the fuel filter to the fuel rail
Both hoses come with new banjo bolts and crush washers.
Please note: We have changed the rubber spec to Gates SAE 30R14 T2 since June 2020. Using this rubber spec our rubber fuel lines are now compatible with E10 grade fuel. However, we would still advise customers to use E5 Super unleaded as there are other parts in the fuel system that may not be compatible with E10 unleaded.
(0 reviews)£48.69 + VAT Add to cart -
205 / 309
205 Grp.N Front Strut Top Rubbers
These uprated rubbers replace standard soft rubbers in the shock absorbers top mounts, located just under strut turrets.
The rubbers are constructed to a very high standard using a rubber compound (with an increased Shore Rating over original), which is considerably firmer than the standard rubbers, making them far stiffer. They give firmer ride and less front suspension flex.
The strut rubbers come as a pair.
Suitable for: Peugeot 205 GTI and 309 GTI.
(0 reviews)£20.12 + VAT Read more -
205 / 309
205 Gearchange Rods (3-rod kit)
Joints in the original gearchange rod setup contain plastic bushes that wear over time, making the gearchange very unprecise and leading to rods popping off and leaving you stranded on a side of the road or track. Our rods are steel-jointed with securing clips that cures both issues.
Suitable for: 205 1.6/1.9 GTI
(0 reviews)£44.94 + VAT Add to cart