We 3D Scanned the original trims, using the scans we have reverse engineered the clips and built them into a neat solution for slotting them in place.
The (old broken) clip will need trimming out (using a Dremel). The replacement will need gluing in place.
Kit contains:-
8 x Replacement Clips
2 x Replacement M4 Centre Blocks for Sunroof Handle
2 x Outer Wings
Includes M4 Screws
We have designed and manufactured this bush to offer a firmer option than the standard item (e.g. reduce engine movement), whilst still retaining some compliance compared to our Grp.A Bush. This product compliment’s Grp.N Full Engine Mounting Kit.
Location: This bush is located within the fork which connects the subframe to the lower engine bush.
Suitable For:
Spec:
Original Peugeot Clips. We have bought a large batch from Peugeot as they often need replacing when fitting our new fuel lines or P.A.S cooling loop pipe.
They are sold individually – please enter the desired quantity when ordering.
These uprated rubbers replace standard soft rubbers in the shock absorbers top mounts, located just under strut turrets.
The rubbers are constructed to a very high standard using a rubber compound (with an increased Shore Rating over original), which is considerably firmer than the standard rubbers, making them far stiffer. They give firmer ride and less front suspension flex.
The strut rubbers come as a pair.
Suitable for: Peugeot 205 GTI and 309 GTI.
EMB205-3 – 205 Grp.N Gearbox Mount – a part of our complete Group N (Grp.N) Engine Mounting Kit has been designed to substantially reduce engine movement by incorporating up-rated and stiffened rubber components. The kit is ideally used for rallying, racing, enhanced engine conversions and modifications.
Available for: 205 1.6/1.9 GTI, 205 XS (please note when adding products to cart)