205 GTI Rubber Induction Hoses – Individual Hose Selector

Code: RH205-25-X-2

205 Gti Induction Hoses in rubber.

Fitment. Model 205 Gti 1.6 & 1.9.  All Years

Split induction hoses are starting to become an issue on the 205 Gti.

Original 30+ year old rubber hoses are cracking and causing air leaks within the induction system.

We have re-manufactured all 3 of induction hoses. Using the latest 3-D scanning technologies we have produced a hose that will not look out of place in any concourse build!

Here you can choose between:

1) Slam Panel to Air Box Hose

2) Air Box to Air Flow Meter Hose

3) Air Flow Meter to Inlet Manifold Hose

All hoses are a direct replacement for the originals, and can be supplied with new clips. Just select from the drop down menu.

 

£37.03 – £56.47 + VAT

In Stock
Share (0)
Total: 0 Total: 0 Total: 0 Total: 0 Total: 0 Total: 0

Description

Additional information

Weight 1.5 kg
Individual Induction Hose Selection

Slam Panel to Air Box, Air Box to Airflow Meter, Airflow Meter to Throttle Body
Add Clips

Yes, No

Related products

  • 205 / 309

    205 Grp.A Rear Beam Mount Kit

     

     

    Replaces standard rubber joints and mounts on all the mounting points of a rear beam.

    Fitting this kit means the rear beam is rigidly attached to the chassis. Giving a more predictable rear end under heavy cornering and more control during lift off over steer.

    Front flexible joints are replaced by acetal bushes (4 in the kit) while rear rubber “sandwich” mounts are replaced with “aircraft spec” quality aluminium blocks with offset studs (2 in the kit). This kit is an evolution and improved fit version of our original BBM-SA-R kit. Unlike standard items, our uprated items will not wear out!

    This modification is a real benefit to a track orientated 205/309. It will also benefit a road car with respect to handling characteristics but at an expense of a slight increase in road noise experienced in the cabin.

    Suitable for: Peugeot 205 GTI and 309 GTI.

    (0 reviews)
    £69.02 + VAT Add to cart
  • 205 / 309

    205 Fast Road Engine Mounting Kit

    EMB205-9 – Our 205 Gti Grp.N engine mounting kit has been one of our main sellers for over 10 years. It is perfect for track orientated cars but on the firm side for road cars.

    We have now developed our fast road set-up. A great upgrade for people looking to tighten up the engine movement but without going to the extreme of the Grp.N set-up.

    The mounts use the same proven design as our Grp.N set-up but with a softer grade of rubber to aid compliance.

    Available for: 205 1.6/1.9 GTI, 205 XS (please note when adding products to cart)

     

    (0 reviews)
    £100.05 + VAT Select options
  • 205 / 309

    205 Bronze Gearstick Pivot Bushes Gti and Non Gti

    Fitment: Suitable for the 205 Gti and Non Gti.

     

     

     

     

    These bronze bushes replace the standard plastic ones found in the gearstick pivot point. These will not flex or distort and therefore reduce play in the linkage system.

    Notes: Ideally to be used with our 205 Gearchange Rods (3-rod kit) and 205 Bronze L-linkage Pivot Bush Kit, as well as Adjustable Quickshift.

    Sold in pairs as pictured

    (0 reviews)
    £14.98 + VAT Add to cart
  • 205 / 309

    205 GTI Fuel Line + P.A.S. Pipe Clips

    Original Peugeot Clips. We have bought a large batch from Peugeot as they often need replacing when fitting our new fuel lines or P.A.S cooling loop pipe.

    They are sold individually – please enter the desired quantity when ordering.

    • 6x clips are needed to replace all the fuel lines under the car
    • 4x Clips are needed to replace the P.A.S cooling loop (1.9 GTI models only)

    (0 reviews)
    £2.25 + VAT Add to cart