205 GTI Air Flow Meter Adjuster Screw Bung

Code: OP205-13

Fitment: All 205/309 Gti’s fitted with Jetronic Fuel injection (Years: 86-91)

We have re-produced the bungs originally found on the Air Flow Meter.

Very few 205 Gti’s still have the bung in place.

These will be a great finishing touch for any owner wanting to maintain the AFM’s original look.

£2.41 + VAT

In Stock
Share (0)
Total: 0 Total: 0 Total: 0 Total: 0 Total: 0 Total: 0

Description

Additional information

Weight 0.01 kg

Related products

  • 205 / 309

    205 Adjustable Top Mounts

    Our extremely popular 205-specific adjustable top suspension mounts.

    Suitable for: Peugeot 205 all models.

    Description:

    • These are intended for use with coilover suspension.
    • Material 7075 T6 Aluminium.
    • Fully CNC machined in house using the latest CAM technology.
    • They house a 42mm O/D Heavy Duty Spherical Bearing.
    • Camber adjustment available is from 0 – neg.3 degrees
    • Caster fixed at 4.5 Degrees Positive.
    • Engraved camber scale giving an indication of adjustment position.
    • Bearing reliefs are machined into the housing, making bearing changes quick and easy.
    • Anodised.
    • These are supplied with M14 Fittings – please email us at contact@bakerbm.com should you require M12
    (0 reviews)
    £230.05 + VAT Add to cart
  • 205 / 309

    205 Bronze Gearstick Pivot Bushes Gti and Non Gti

    Fitment: Suitable for the 205 Gti and Non Gti.

     

     

     

     

    These bronze bushes replace the standard plastic ones found in the gearstick pivot point. These will not flex or distort and therefore reduce play in the linkage system.

    Notes: Ideally to be used with our 205 Gearchange Rods (3-rod kit) and 205 Bronze L-linkage Pivot Bush Kit, as well as Adjustable Quickshift.

    Sold in pairs as pictured

    (0 reviews)
    £14.98 + VAT Add to cart
  • 205 / 309

    205 Torsion Bar End Stop

    The torsion bar end stops screw into the rear axle beam tube. They act as a end stop for the torsion bar screw

    They are a direct replacement for the standard item. Two are required per axle.

    Note: Sold individually – increase quantity to buy more than one.

    (0 reviews)
    £3.85 + VAT Add to cart
  • 205 / 309

    205 Grp.A Rear Beam Mount Kit

     

     

    Replaces standard rubber joints and mounts on all the mounting points of a rear beam.

    Fitting this kit means the rear beam is rigidly attached to the chassis. Giving a more predictable rear end under heavy cornering and more control during lift off over steer.

    Front flexible joints are replaced by acetal bushes (4 in the kit) while rear rubber “sandwich” mounts are replaced with “aircraft spec” quality aluminium blocks with offset studs (2 in the kit). This kit is an evolution and improved fit version of our original BBM-SA-R kit. Unlike standard items, our uprated items will not wear out!

    This modification is a real benefit to a track orientated 205/309. It will also benefit a road car with respect to handling characteristics but at an expense of a slight increase in road noise experienced in the cabin.

    Suitable for: Peugeot 205 GTI and 309 GTI.

    (0 reviews)
    £69.02 + VAT Add to cart