View cart “205 GTI Fuel Line + P.A.S. Pipe Clips” has been added to your cart.
205 8v Silicone Supplementary Device (SAD) Hoses
Code: SH205-8
Direct replacement hoses for the “Supplementary Air Device” system found on all pre-CAT 205/309 GTI’s. These hoses are the same for RHD and LHD models. Both hoses are Fluro lined to prevent damage caused from any contact with oil.
Contents: Two replacement hoses to run from the SAD valve to Inlet track.
These hoses are suitable for all 205/309 1.6/1.9 GTI’s.
Our Rubber fuel lines are remanufactured so they are a direct replacement for standard hoses.
They are sold as a pair:
The short hose runs from the steel fuel line to the bottom of the fuel filter
The longer hose runs from the top of the fuel filter to the fuel rail
Both hoses come with new banjo bolts and crush washers.
Please note: We have changed the rubber spec to Gates SAE 30R14 T2 since June 2020. Using this rubber spec our rubber fuel lines are now compatible with E10 grade fuel. However, we would still advise customers to use E5 Super unleaded as there are other parts in the fuel system that may not be compatible with E10 unleaded.
This is the one bush which gets over looked when the engine mounts are uprated. The original bush is usually worn and allows unnecessary engine movement for race/rally/trackday setups.
Location: This bush is located within the fork which connects the subframe to the lower engine bush.
Suitable For:
Fits all 106 and 205 models incl. GTi
Direct replacement for original
For a more compliant version of the bush, take a look at the Grp.N version.
EMB205-4 – 205 Grp.N Lower Engine Bush – a part of our complete Group N (Grp.N) Engine Mounting Kit has been designed to substantially reduce engine movement by incorporating up-rated and stiffened rubber components. The kit is ideally used for rallying, racing, enhanced engine conversions and modifications.
Available for: 205 1.6/1.9 GTI, 205 XS (please select when adding products to cart)
We have designed and manufactured this bush to offer a firmer option than the standard item (e.g. reduce engine movement), whilst still retaining some compliance compared to our Grp.A Bush. This product compliment’s Grp.N Full Engine Mounting Kit.
Location: This bush is located within the fork which connects the subframe to the lower engine bush.