205 8v Rubber Supplementary Device (SAD) Hoses 86-91

Code: RH205-4x-2

Direct replacement hoses for the “Supplementary Air Device” system found on all pre-CAT 205/309 GTI’s. These hoses are the same for RHD and LHD models.

Contents: Two replacement hoses to run from the SAD valve to Inlet track.

These hoses are suitable for all 205/309 1.6/1.9 GTI’s and available as a kit or individually – please select when adding to shopping cart.

Colour: Black

£20.33 – £40.66 + VAT

In Stock
Share (1)
Total: 0 Total: 0 Total: 0 Total: 0 Total: 1 Total: 0

Additional information

Weight 1.4 kg
Select S.A.D Hoses

, ,

Related products

  • 205 / 309

    205 / 106 Grp.N Lower Engine Fork Bush

    We have designed and manufactured this bush to offer a firmer option than the standard item (e.g. reduce engine movement), whilst still retaining some compliance compared to our Grp.A Bush. This product compliment’s Grp.N Full Engine Mounting Kit.

    Location: This bush is located within the fork which connects the subframe to the lower engine bush.

    Suitable For:

    • Fits all 106 and 205 models incl. GTi
    • Direct replacement for original

    Spec:

    • 70 shore natural rubber
    • Fully stressed relieved
    • Centreless ground outer diameter

     

    (0 reviews)
    £19.05 + VAT Select options
  • 205 / 309

    205 Bronze L-linkage Pivot Bush Kit GTI

    The original linkage setup consists of two plastic bushes and a spring washer, even when new this setup had a lot of unwanted play in it. The linkage will now more than likely be considerably worn, causing the linkage system to feel “sloppy”. There are other kits available which replace the plastic bushes with bronze equivalents but the spring washer design is still utilized, along with the original large shanked bolt.

    Only by changing the design of the pivot system (by using this kit) can the sloop be reduced entirely.

    (1 review)
    £31.03 + VAT Add to cart
  • 205 / 309

    205 Fast Road Engine Mounting Kit

    EMB205-9 – Our 205 Gti Grp.N engine mounting kit has been one of our main sellers for over 10 years. It is perfect for track orientated cars but on the firm side for road cars.

    We have now developed our fast road set-up. A great upgrade for people looking to tighten up the engine movement but without going to the extreme of the Grp.N set-up.

    The mounts use the same proven design as our Grp.N set-up but with a softer grade of rubber to aid compliance.

    Available for: 205 1.6/1.9 GTI, 205 XS (please note when adding products to cart)

     

    (0 reviews)
    £100.05 + VAT Select options
    205 / 309

    205 GTI Power Steering Cooling Loop

    This is the power steering cooling loop pipe which runs under the car on 205 GTI models equipped with PAS. The originals are prone to rust due to their location.

    Using an original we have re-manufactured them using a CNC tube bender, then a custom jig has been made to manipulate the final bend. Using CNC technology ensures their complicated shape is repeatedly replicated accurately.

    Manufacturing process:

    • Steel tube is CNC bent to match original shape
    • The lines are then Chromium 6-free plated
    • Clean pelleted (cleans inside tube)

     

     

     

    (0 reviews)
    £41.52 + VAT Add to cart