205 8v Rubber Oil Breather Hoses – Individual Hose Selector

Code: RH205-3-x

These hoses replace the original worn rubber set, ensuring the highest oil breather system reliability possible.

Here you can choose and individually order the following 5 hoses in the system:

  • Main Filler Hose
  • Cam Cover To Block
  • Filler Tower To Block
  • Filler Cap to Induction Hose
  • Filler Cap to Throttle Body

The hoses are suitable for all 205/309 1.6/1.9 GTI’s.

Hose No.1 is over £70 from Peugeot alone. Some of the others are no longer available from Peugeot.

If you require a complete kit, please take a look at our 205 8v Rubber Oil Breather Hoses Kit.

£18.19 – £36.38 + VAT

In Stock
Share (0)
Total: 0 Total: 0 Total: 0 Total: 0 Total: 0 Total: 0

Additional information

Weight 0.7 kg
Individual Rubber Oil Breather Hose

, , , ,

Related products

  • 205 / 309

    205 GTI Engine Mount Shim Kit

    Shims are placed behind buffers to space them closer to the top engine mount.

    Fitting the correct combination of shims means, as the engine moves under acceleration / engine braking the top mount can come into contact with the buffers sooner and reduce any excess movement.

    These can be used with OE std buffers or either of our Fast Road or GrpN Style replacements.

     

    Available for: 205 1.6/1.9 GTI, 205 XS

    (0 reviews)
    £7.70 + VAT Add to cart
  • 205 / 309

    205 Bronze Gearstick Pivot Bushes Gti and Non Gti

    Fitment: Suitable for the 205 Gti and Non Gti.

     

     

     

     

    These bronze bushes replace the standard plastic ones found in the gearstick pivot point. These will not flex or distort and therefore reduce play in the linkage system.

    Notes: Ideally to be used with our 205 Gearchange Rods (3-rod kit) and 205 Bronze L-linkage Pivot Bush Kit, as well as Adjustable Quickshift.

    Sold in pairs as pictured

    (0 reviews)
    £14.98 + VAT Add to cart
  • 205 / 309

    205 Grp.A Rear Beam Mount Kit

     

     

    Replaces standard rubber joints and mounts on all the mounting points of a rear beam.

    Fitting this kit means the rear beam is rigidly attached to the chassis. Giving a more predictable rear end under heavy cornering and more control during lift off over steer.

    Front flexible joints are replaced by acetal bushes (4 in the kit) while rear rubber “sandwich” mounts are replaced with “aircraft spec” quality aluminium blocks with offset studs (2 in the kit). This kit is an evolution and improved fit version of our original BBM-SA-R kit. Unlike standard items, our uprated items will not wear out!

    This modification is a real benefit to a track orientated 205/309. It will also benefit a road car with respect to handling characteristics but at an expense of a slight increase in road noise experienced in the cabin.

    Suitable for: Peugeot 205 GTI and 309 GTI.

    (0 reviews)
    £69.02 + VAT Add to cart
  • 205 / 309

    205 Offset Washer

    The offset washer is used to locate one end of the torsion bar into the trailing arm. These are prone to damage on removal.

    They are a direct replacement for the standard item. Two are required per axle.

    Note: Sold individually – increase quantity to buy more than one.

    (0 reviews)
    £1.18 + VAT Add to cart