These caps are originally plastic and become brittle over time.
We have CNC machined these from 6082 T6 Aluminium billets.
These were fitted on 205 Gti’s from late ’91 onwards. (They are dimensionally different from pre ’91 caps)
Anodised black to keep a factory look
(Please note: They do not include the bleed fitting
| Weight | 0.1 kg |
|---|
The torsion bar end stops screw into the rear axle beam tube. They act as a end stop for the torsion bar screw
They are a direct replacement for the standard item. Two are required per axle.
Note: Sold individually – increase quantity to buy more than one.
EMB205-5 – Group N Top Mount Buffer – a part of our complete Group N (Grp.N) Engine Mounting Kit that has been designed to substantially reduce engine movement by incorporating up-rated and stiffened rubber components. The kit is ideally used for rallying, racing, enhanced engine conversions and modifications.
Note: Additional individual buffer. Add quantity for more.
Fitment for: 205 1.6/1.9 GTI, 205 XS
These uprated rubbers replace standard soft rubbers in the shock absorbers top mounts, located just under strut turrets.
The rubbers are constructed to a very high standard using a rubber compound (with an increased Shore Rating over original), which is considerably firmer than the standard rubbers, making them far stiffer. They give firmer ride and less front suspension flex.
The strut rubbers come as a pair.
Suitable for: Peugeot 205 GTI and 309 GTI.
This is the power steering cooling loop pipe which runs under the car on 205 GTI models equipped with PAS. The originals are prone to rust due to their location.
Using an original we have re-manufactured them using a CNC tube bender, then a custom jig has been made to manipulate the final bend. Using CNC technology ensures their complicated shape is repeatedly replicated accurately.
Manufacturing process: