205 GTI Brake Servo Vacuum Pipe

Code: RH205-21-2

Direct replacement for the original.

Hose runs from: Side of inlet manifold to brake servo. On vacuum sunroof equipped cars there is a T-peice located near the brake servo. A short section of hose is supplied to replace this section if with sunroof is selected.

Designed to an OE style with the braided cotton outer covering.

Available for RHD and LHD configurations.

Supplied cut to length with our cobra clips for a neat installation.

£14.18 + VAT

In Stock
Product total
Options total
Grand total
Share (1)
Total: 1 Total: 0 Total: 0 Total: 0 Total: 0 Total: 0

Description

Additional information

Weight 0.4 kg
With or Without sunroof

With sunroof, Without sunroof

Related products

  • 205 / 309

    205 Bronze Gearstick Pivot Bushes Gti and Non Gti

    Fitment: Suitable for the 205 Gti and Non Gti.

     

     

     

     

    These bronze bushes replace the standard plastic ones found in the gearstick pivot point. These will not flex or distort and therefore reduce play in the linkage system.

    Notes: Ideally to be used with our 205 Gearchange Rods (3-rod kit) and 205 Bronze L-linkage Pivot Bush Kit, as well as Adjustable Quickshift.

    Sold in pairs as pictured

    (0 reviews)
    £15.88 + VAT Add to cart
  • 205 / 309

    205 Adjustable Top Mounts

     

     

    Our extremely popular 205-specific adjustable top suspension mounts.

    Suitable for: Peugeot 205 all models.

    Description:

    • These are intended for use with coilover suspension.
    • Material 7075 T6 Aluminium.
    • Fully CNC machined in house using the latest CAM technology.
    • They house a 42mm O/D Heavy Duty Spherical Bearing.
    • Camber adjustment available is from 0 – neg.3 degrees
    • Caster fixed at 4.5 Degrees Positive.
    • Engraved camber scale giving an indication of adjustment position.
    • Bearing reliefs are machined into the housing, making bearing changes quick and easy.
    • Anodised.
    • These are supplied with M14 Fittings – please email us at contact@bakerbm.com should you require M12
    (0 reviews)
    £275.65 + VAT Add to cart
  • 205 / 309

    205 Heavy Duty Stub Axle

    Features:

    • In-house CNC machined
    • Larger rear collar
    • Material: EN24T
    • Chemically Blacked

    Note: Sold individually – increase quantity to buy more than one.

     

     

    (0 reviews)
    £59.76 + VAT Add to cart
  • 205 / 309

    205 Bronze L-linkage Pivot Bush Kit GTI

    The original linkage setup consists of two plastic bushes and a spring washer, even when new this setup had a lot of unwanted play in it. The linkage will now more than likely be considerably worn, causing the linkage system to feel “sloppy”. There are other kits available which replace the plastic bushes with bronze equivalents but the spring washer design is still utilized, along with the original large shanked bolt.

    Only by changing the design of the pivot system (by using this kit) can the sloop be reduced entirely.

    (1 review)
    £32.89 + VAT Add to cart