Notes:
– Modifications to the strut top of your car will need to be made to allow clearance for adjustment.
– These are intended for fitment on coil over not stand shock absorber.
– Replacement bearings available at £25 + VAT each.
Quantity: Supplied in pair.
| Weight | 1.5 kg |
|---|---|
| M12/M14 | M12, M14 |
These hoses replace the original worn rubber set, ensuring the highest oil breather system reliability possible. The hose is made from 3ply silicone (4mm wall thickness).
The hoses are Fluoro Lined to stop any damage from contact with oil.
Colour choice: Black, Blue or Red
PLEASE NOTE – CURRENTLY OUT OF STOCK
The hoses are made from 3ply silicon (4mm wall thickness).
The kit includes a total of 5 hoses:
Colour choice: Black, Blue or Red
This hose is intended for the 106 S1 Rallye which is fitted with the heat exchanger.
BakerBM have developed their I.D. reducer which is an integral part of this type of hose. The I.D. reducer directs the flow of water around the Heat Exchanger and means the high efficiency of the Heat Exchanger is retained.
This hose is no longer available from Peugeot. We have made a short run of these hoses to test the market. Don’t miss out on your chance to get a spare!
The hoses are made from 3ply Silicone (4mm wall thickness).
Colour choice: Black, Blue or Red
Fitting this mount will reduce engine movement considerably. Ideally fitted as part of our complete GrpN spec Engine kit The 12mm high tensile CNC manufactured bolt design eliminates the problems associated with the OEM mount.
Location: A direct replacement for the hydraulic engine mount found beneath the ECU
Suitable For: 106 Phase 2 all models (96 onwards) & Saxo all models
Advantages over standard mountings: