205 Stainless Steel Inner Wing Pipe

Code: SH205-16

This stainless steel inner wing pipe is a direct replacement for an OE pipe, that is usually heavily rotten by now and can lead to coolant leaks and premature engine failure. Our replacement stainless steel pipe will outlast your 205!

Suits 205/309, all models.

Note: Silicone hoses in the photo are only used for illustration and are not included with the pipe!

£23.54 + VAT

In Stock
Share (0)
Total: 0 Total: 0 Total: 0 Total: 0 Total: 0 Total: 0

Additional information

Weight 0.40 kg

You may also like…

  • 205 / 309

    205 GTI RHD Rubber Coolant Hoses Kits (All variants)

    These hoses replace the original worn rubber set, ensuring the highest coolant system reliability possible, whilst giving OE look and being cheaper than our Silicone Coolant Hose Kit.

    Contents: The 8v coolant hose kit includes all hoses within the coolant system on a RHD Peugeot 205 GTI. For

    Notes: All hoses can be sold separate.

    We offer this kit for Pre91 and Post91 setups. Please select your setup when purchasing.

    (0 reviews)
    £163.71 – £172.27 + VAT Select options
  • Breather Hoses inc Oil / S.A.D / Induction/Vacuum/Brake Servo

    205 8v Rubber Supplementary Device (SAD) Hoses 86-91

    Direct replacement hoses for the “Supplementary Air Device” system found on all pre-CAT 205/309 GTI’s. These hoses are the same for RHD and LHD models.

    Contents: Two replacement hoses to run from the SAD valve to Inlet track.

    These hoses are suitable for all 205/309 1.6/1.9 GTI’s and available as a kit or individually – please select when adding to shopping cart.

    Colour: Black

    (0 reviews)
    £20.33 – £40.66 + VAT Select options
  • 205 / 309

    205 GTI LHD Rubber Coolant Hoses Kit

    These hoses replace the original worn rubber set, ensuring the highest coolant system reliability possible, whilst giving OE look and being cheaper than our Silicone Coolant Hose Kit.

    Contents: The 8v coolant hose kit includes all 10 hoses within the coolant system on a LHD Peugeot 205 GTI.

    Notes: All hoses can be sold separate.

    (0 reviews)
    £166.92 – £175.48 + VAT Select options

Related products

  • 205 / 309

    205 Offset Washer

    The offset washer is used to locate one end of the torsion bar into the trailing arm. These are prone to damage on removal.

    They are a direct replacement for the standard item. Two are required per axle.

    Note: Sold individually – increase quantity to buy more than one.

    (0 reviews)
    £1.18 + VAT Add to cart
  • 205 / 309

    205 / 106 Grp.A Lower Engine Fork Bush

    This is the one bush which gets over looked when the engine mounts are uprated. The original bush is usually worn and allows unnecessary engine movement for race/rally/trackday setups.

    Location: This bush is located within the fork which connects the subframe to the lower engine bush.

    Suitable For:

    • Fits all 106 and 205 models incl. GTi
    • Direct replacement for original

    For a more compliant version of the bush, take a look at the Grp.N version.

    (0 reviews)
    £20.87 + VAT Select options
  • 205 / 309

    205 GTI Rubber Fuel Lines

    Our Rubber fuel lines are remanufactured so they are a direct replacement for standard hoses.

    They are sold as a pair:

    • The short hose runs from the steel fuel line to the bottom of the fuel filter
    • The longer hose runs from the top of the fuel filter to the fuel rail

    Both hoses come with new banjo bolts and crush washers.

    Please note: We have changed the rubber spec to Gates SAE 30R14 T2  since June 2020.   Using this rubber spec our rubber fuel lines are now compatible with E10 grade fuel.  However, we would still advise customers to use E5 Super unleaded as there are other parts in the fuel system that may not be compatible with E10 unleaded.

    (0 reviews)
    £48.69 + VAT Add to cart
  • 205 / 309

    205 Grp.A Rear Beam Mount Kit

     

     

    Replaces standard rubber joints and mounts on all the mounting points of a rear beam.

    Fitting this kit means the rear beam is rigidly attached to the chassis. Giving a more predictable rear end under heavy cornering and more control during lift off over steer.

    Front flexible joints are replaced by acetal bushes (4 in the kit) while rear rubber “sandwich” mounts are replaced with “aircraft spec” quality aluminium blocks with offset studs (2 in the kit). This kit is an evolution and improved fit version of our original BBM-SA-R kit. Unlike standard items, our uprated items will not wear out!

    This modification is a real benefit to a track orientated 205/309. It will also benefit a road car with respect to handling characteristics but at an expense of a slight increase in road noise experienced in the cabin.

    Suitable for: Peugeot 205 GTI and 309 GTI.

    (0 reviews)
    £69.02 + VAT Add to cart