Direct replacement hoses for the “Supplementary Air Device” system found on all pre-CAT 205/309 GTI’s. These hoses are the same for RHD and LHD models. Both hoses are Fluro lined to prevent damage caused from any contact with oil.
Contents: Two replacement hoses to run from the SAD valve to Inlet track.
These hoses are suitable for all 205/309 1.6/1.9 GTI’s (86-91 Years)
Our Rubber fuel lines are remanufactured so they are a direct replacement for standard hoses.
They are sold as a pair:
The short hose runs from the steel fuel line to the bottom of the fuel filter
The longer hose runs from the top of the fuel filter to the fuel rail
Both hoses come with new banjo bolts and crush washers.
Please note: We have changed the rubber spec to Gates SAE 30R14 T2 since June 2020. Using this rubber spec our rubber fuel lines are now compatible with E10 grade fuel. However, we would still advise customers to use E5 Super unleaded as there are other parts in the fuel system that may not be compatible with E10 unleaded.
EMB205-9 – Our 205 Gti Grp.N engine mounting kit has been one of our main sellers for over 10 years. It is perfect for track orientated cars but on the firm side for road cars.
We have now developed our fast road set-up. A great upgrade for people looking to tighten up the engine movement but without going to the extreme of the Grp.N set-up.
The mounts use the same proven design as our Grp.N set-up but with a softer grade of rubber to aid compliance.
Available for: 205 1.6/1.9 GTI, 205 XS (please note when adding products to cart)
These bronze bushes replace the standard plastic ones found in the gearstick pivot point. These will not flex or distort and therefore reduce play in the linkage system.
Notes: Ideally to be used with our 205 Gearchange Rods (3-rod kit) and 205 Bronze L-linkage Pivot Bush Kit, as well as Adjustable Quickshift.
We have designed and manufactured this bush to offer a firmer option than the standard item (e.g. reduce engine movement), whilst still retaining some compliance compared to our Grp.A Bush. This product compliment’s Grp.N Full Engine Mounting Kit.
Location: This bush is located within the fork which connects the subframe to the lower engine bush.