205 Shortened Coolant Radiator

Code: AP205-5

These radiators are ideal for anybody looking to maximise the performance of their Peugeot 205 GTI/Mi16. They are approximately 3 inches shorter than the original radiator and 64 mm thick (twice as thick as standard).

When running Carbs or Throttle bodies in conjunction with the standard radiator set-up the inlet temperatures become a problem, they effectively stifle the potential performance of your engine. Switching to one of our shortened radiators enables you to take full advantage of the direct cold air flow now available.

These have been designed so they are direct fitment into your 205 GTI’s engine bay.

A slim line cooling fan can be added for an extra £50.00.  Delivery approx 4 weeks

 

 

£428.00 – £481.50 + VAT

In Stock
Share (0)
Total: 0 Total: 0 Total: 0 Total: 0 Total: 0 Total: 0

Description

Combinations of Oil Coolers and Intercoolers can be made to customer designs. Please contact with your requirements.

 

 

 

 

Additional information

Weight 6.5 kg
Do you want to add a slim-line cooling fan?

,

You may also like…

    205 / 309

    205 Stainless Steel Inner Wing Pipe

    This stainless steel inner wing pipe is a direct replacement for an OE pipe, that is usually heavily rotten by now and can lead to coolant leaks and premature engine failure. Our replacement stainless steel pipe will outlast your 205!

    Suits 205/309, all models.

    Note: Silicone hoses in the photo are only used for illustration and are not included with the pipe!

    (1 review)
    £23.54 + VAT Add to cart

Related products

  • 205 / 309

    205 Gearchange Rods (3-rod kit)

    Joints in the original gearchange rod setup contain plastic bushes that wear over time, making the gearchange very unprecise and leading to rods popping off and leaving you stranded on a side of the road or track. Our rods are steel-jointed with securing clips that cures both issues.

    Suitable for: 205 1.6/1.9 GTI

    (0 reviews)
    £44.94 + VAT Add to cart
  • 205 / 309

    205 GTI Rubber Fuel Lines

    Our Rubber fuel lines are remanufactured so they are a direct replacement for standard hoses.

    They are sold as a pair:

    • The short hose runs from the steel fuel line to the bottom of the fuel filter
    • The longer hose runs from the top of the fuel filter to the fuel rail

    Both hoses come with new banjo bolts and crush washers.

    Please note: We have changed the rubber spec to Gates SAE 30R14 T2  since June 2020.   Using this rubber spec our rubber fuel lines are now compatible with E10 grade fuel.  However, we would still advise customers to use E5 Super unleaded as there are other parts in the fuel system that may not be compatible with E10 unleaded.

    (0 reviews)
    £48.69 + VAT Add to cart
  • 205 / 309

    205 GTI Fuel Line + P.A.S. Pipe Clips

    Original Peugeot Clips. We have bought a large batch from Peugeot as they often need replacing when fitting our new fuel lines or P.A.S cooling loop pipe.

    They are sold individually – please enter the desired quantity when ordering.

    • 6x clips are needed to replace all the fuel lines under the car
    • 4x Clips are needed to replace the P.A.S cooling loop (1.9 GTI models only)

    (0 reviews)
    £2.25 + VAT Add to cart
  • 205 / 309

    205 Grp.N Front Strut Top Rubbers

    These uprated rubbers replace standard soft rubbers in the shock absorbers top mounts, located just under strut turrets.

    The rubbers are constructed to a very high standard using a rubber compound (with an increased Shore Rating over original), which is considerably firmer than the standard rubbers, making them far stiffer. They give firmer ride and less front suspension flex.

    The strut rubbers come as a pair.

    Suitable for: Peugeot 205 GTI and 309 GTI.

    (0 reviews)
    £20.12 + VAT Add to cart